Transporting the appliance or long periods when appliance is not in use

If the appliance is being transported or is out of use for long periods in unheated places, all remaining water must be completely removed from the hoses.

Ensure mains power is off, then unclip the hose and point it downwards into a basin until all the water has emptied out.

When finished, repeat the operation in the reverse order.

Investigating malfunctions

What might be the cause of…

Defects you can remedy yourself

 

MALFUNCTION

 

CAUSE

 

 

REMEDY

 

 

 

 

 

 

 

 

 

 

1.

Does not work on any

 

 

 

 

 

 

 

Plug not in socket.

 

 

 

 

Plug it in.

 

programme

 

Not switched on.

 

 

Switch on.

 

 

 

 

 

Power failure.

 

 

Check.

 

 

 

 

 

Fuse blown.

 

 

Check.

 

 

 

 

 

Door open.

 

 

Close door.

 

 

 

 

 

 

 

 

 

 

 

2.

Does not fill with water

 

See cause 1.

 

 

Check.

 

 

 

 

 

Tap turned off.

 

 

Turn on tap.

 

 

 

 

 

Programme selector not correctly

 

 

Position programme selector

 

 

 

 

 

positioned.

 

 

correctly.

 

 

 

 

 

 

 

 

 

 

 

3.

Water does not drain

 

Kink in discharge hose.

 

 

Straighten discharge hose.

 

 

away

 

Foreign bodies in filter

 

 

Examine filter (see pages 21-22)

 

 

 

 

 

 

 

 

 

 

 

4.

Water on floor around

 

Leaking gasket between tap and water

 

 

Replace gasket and tighten hose

 

 

the washing machine

 

inlet hose.

 

 

and tap well.

 

 

 

 

 

 

 

 

 

 

 

5.

Does not spin

 

Water has not yet drained away.

 

 

Wait a few minutes for machine to

 

 

 

 

 

"No spin" selected (certain models

 

 

empty.

 

 

 

 

 

only).

 

 

Reset button or turn "no spin" knob.

 

 

 

 

 

 

 

 

 

 

 

6.

Machine vibrates a lot

 

Washing machine not completely level.

 

 

Adjust the special adjustable feet.

 

 

during spin

 

Transit brackets not removed yet.

 

 

Remove transit brackets.

 

 

 

 

 

Load not distributed evenly.

 

 

Rearrange the laundry evenly.

 

 

 

 

 

 

 

 

 

 

 

7.

Door will not open

 

Two minutes have not elapsed since

 

 

Wait two minutes.

 

 

 

 

 

the programme finished.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The machine makes a different noise when spinning! This is because it has a manifold motor for better performance.

Only a small level of water can be seen in the drum! This is because new machines do not use much water, yet achieve the same standard of washing and rinsing.

22

23