Description of controls
Fig. 1
L M B
P
C D E F G
I
N
A
Door handle | A |
“Door Locked” indicator light | B |
“Start/Pause” button | C |
“Pre Wash” button | D |
“Express Wash” button | E |
“Extra Rinse” button | F |
“Fast Iron” button | G |
Wash control temperature knob | I |
Buttons indicator light | L |
Time countdown system indicator lights | M |
Timer knob for wash programmes with “OFF” position | N |
Detergent drawer | P |
6 |
|
Door handle | A |
|
Press the
DOOR LOCKED indicator light | B |
The "Door Locked" indicator light is illuminated when the door is fully closed and the machine is ON.
When the "Start/Pause" button is pressed on the machine with the door closed the indicator will flash momentarily and then illuminate.
If the door is not closed the indicator will continue to flash.
A special safety device prevents the door from being opened immediately after the end of the cycle. Wait for 2 minutes after the wash cycle has finished and the "Door Locked" light has gone out before opening the door. At the end of cycle turn the programme selector to "OFF".
START/PAUSE button | C |
When a programme is selected, wait for the "END" indicator light to flash before pressing the "Start/Pause" button.
Press to start the selected cycle (according to the selected cycle one indicator light will go on).
Note: When the "Start/Pause" button has been pressed, the appliance can take a few seconds before it starts working.
Changing the settings after the programme has started (PAUSE)
The programme may be paused at any time during the wash cycle by holding down the "Start/Pause" button for about two seconds. When the machine is in the paused mode, the "COUNTDOWN" indicator and option buttons will flash.
To restart the programme, press the "Start/Pause" button once again.
If you wish to add or remove items during washing, wait 2 minutes until the safety device unlocks the door.
When you have carried out the manoeuvre, close the door, press the "Start/Pause" button and the appliance will continue working where it left off.
CANCELLING THE PROGRAMME
To cancel the programme, the programme selector should be rotated to the "OFF" position.
7