Maytag MAF 9801 manual Button, 6TEMPORARY Alteration of TEMPERA- Ture and Spin Speed

Models: MAF 9801

1 36
Download 36 pages 34.92 Kb
Page 14
Image 14
SELECT A PRE-SET PROGRAMME

5The machine has four pre-set program- mes. Press the button for the desired programme. The programmes are shown in the

table below.

You can then easily adjust the Temperature and the Spin speed; see the next step.

You can also make permanent alterations (to programmes, settings and options, etc.) in the pre-set programmes so that they meet your par- ticular needs; see Chapter 11, Making your own washing programmes.

If you only wish to spin or rinse without changing the settings permanently, see below in this Chapter.

6TEMPORARY ALTERATION OF TEMPERA- TURE AND SPIN SPEED

Temperature

Alter the temperature by indexing forward with

the button.

Programme information

 

type

 

quantity

°C

 

Programme

Max

Temperature (A)

 

 

P1

Normal

 

 

60°C

P2

White/Coloured

 

 

40°C

P3

Quick

 

 

40°C

P4

Hand (B)

 

 

30°C

1/1 (6,0 kg)

Wash

1/2 (3,0 kg)

Rinse

1/3 (2,0kg)

The selected temperature is indicated on the bottom edge of the display together with the symbol as you index forward.

You can select temperatures between 30°C and 95°C or C. By selecting C, the wash tempe- rature will be the same as that of the incoming water.

It is not possible to select a temperature hig- her than 40°C for the Hand programme.

If you wish to save the change permanently (max. 60°C), you can press the Enter button af- ter making the change.

Spin speed/No spin

Change the spin speed by indexing forward with

the button.

The selected speed is indicated in the top right corner of the display together with the symbol as you index forward.

You can choose between different speeds (400

-1800 revolutions/minute), No Spin or No Spin or No Drain.

Programme content

 

speed

r/min

(A)

wash

Main

wash

Rinse

Spin

Rinse

Spin

Rinse

Spin

Spin

 

 

Pre

Spin

 

 

 

 

-

 

 

 

 

 

 

 

 

1800

1200

800

800

Short spin

WM5566-P14-3

(max 800 r/min)

(A) Can be changed before start;

see instructions.

Long spin

(B) Gentle programme – high

 

water level.

14

Page 14
Image 14
Maytag MAF 9801 manual Button, 6TEMPORARY Alteration of TEMPERA- Ture and Spin Speed