![](/images/new-backgrounds/1304052/30405257x1.webp)
Over flow. Phone Service.
Temperature stop fault. Faulty temperature stop, phone Service.
Thermistor fault. Faulty thermistor, phone Ser- vice.
Water inlet fault. Fault in the supply of water, ensure:
-that the water tap is open.
-that the strainer in the water inlet connection is not clogged.
1. Turn off the water tap.
2. Disconnect the hose.
3. Clean the strainer in the water inlet of the machine.
4.
5. Open the water tap.
6. Run the programme again to check that the fault is remedied.
Water outlet fault. Faulty pumping, check the drain hose and the drain pump.
1. Straighten out any kinks in the drain hose.
2. Is there anything stuck in the drain hose outlet? Clear the hose.
3. Is the drain pump blocked by foreign ob jects? Clear the pump, see Chapter 12, Care and cleaning.
4. Run the programme Drain.
Wash motor fault. Phone Service.
0000 flashes at the top right of the display. The machine has failed to spin.
1. The machine incorporates an
lanced. Turn the main switch, off and turn it on again. Open the door and redistribute the washing.
2. After correcting, run the programme Spin.
If flashes at the lower right corner of the display it is an indication that you have attemp- ted to start a programme with the door open. Close the door and try again.
WRONG LANGUAGE ON THE DISPLAY
If the language on the display becomes altered for any reason, it can be restored to the initial language again.
The available languages are Dansk, Deutsch, English, Espanol, Français, Italiano, Nederlands, Norsk, Portugués, Suomi and Svenska.
Proceed as follows to change the language:
Turn the main switch, off and turn it on again. Press the Enter button five times, then press the P1 button five times. These ten ti- mes must be completed within fifteen seconds.
Within three seconds after pressing P1 the last time, step to the desired language using the
![](/images/new-backgrounds/1304052/30405257xi6.webp)
buttons.
29