BEFORE YOU CALL CONT.
CHECK THESE POINTS IF YOUR MAYTAG NEPTUNE® WASHER...
| • Be sure the door is tightly closed. | ||
| • Plug cord into a live electrical outlet. (Tub light should illuminate). | ||
| • Check fuse or reset circuit breaker. | ||
Won’t Fill | • Press the start/pause pad. | ||
• Turn both faucets on fully. | |||
| |||
| • | Straighten inlet hoses. | |
| • Disconnect hoses and clean screens. Hose filter screens may be plugged. | ||
| • Open and close the door, then push the start/pause pad. | ||
| • Check fuse or reset circuit breaker. | ||
Won’t Tumble | • | Close the door and press the start/pause pad. For your safety, the clothes washer will not | |
|
| tumble or spin unless the door is closed. | |
Door Locked Shut; | • | Press the start/pause pad to stop the machine. | |
Will Not Open | • | It may take a few moments for the door lock mechanism to disengage. | |
Freshening | • See Interior Cleaning, page 8. | ||
Your Washer | |||
|
| ||
| • Clothes washer should be leveled properly as outlined in installation instructions. | ||
Is Noisy | • Check that the leveling leg lock nuts are tightened. | ||
• | Be sure rubber feet are installed on leveling legs. | ||
| • Weak floors can cause vibration and walking. | ||
| • | For information on normal operating sounds, see page 13. | |
For further assistance, call Maytag Customer Service
U.S. customers using TTY for deaf, hearing impaired or speech impaired, call
11
