Maytag MAV-31 warranty Leaks Water, Is Noisy, Fills with the Wrong Temperature Water

Before You Call (continued)

Leaks Water

•Make sure water inlet hose connections are tight at faucet and water valve.

•Make sure end of drain hose is correctly inserted and secured to drain facility.

•Avoid extended soaking – soak for 30 minutes or less.

•Avoid overloading.

Is Noisy

•Be sure washer is leveled properly as outlined in installation manual.

•Weak floors can cause vibration and walking.

•Be sure rubber feet are installed on leveling legs.

•Operating sounds will vary depending on agitation speed.

Fills with the Wrong Temperature Water

•Turn both faucets on fully.

•Make sure temperature selection is correct.

•Make sure hoses are connected to correct faucets and inlet connections. Be sure water supply is regulated correctly. Flush water line before filling washer.

•Check the water heater. It should be set to deliver a minimum 120° F (49° C) hot water at the tap. Also check water heater capacity and recovery rate.

•Disconnect hoses and clean screens. Hose filter screens may be plugged.

Cycle Selector Advances Through “Off”

• Extra rinse is selected.

For further assistance contact Maytag Appliances Sales Company, Maytag Customer Assistance:

U.S. 1-800-688-9900 or Canada 1-800-688-2002

U.S. customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.

NOTE: In our continuing effort to improve the quality of our appliances, it may be necessary to make changes to the appliance without revising this guide.

9