Before Your First Use
Carefully unpack the coffee maker and remove all packaging materials. Wipe the heating stand with a clean, damp cloth. Do not immerse the heating stand in water or other liquid. To remove any dust that may have accumulated on the removable parts during packaging, wash the carafe, lid and filter basket with warm soapy water. Rinse and dry. We recommend that prior to brewing your first pot of coffee, you “brew” just the cold water without ground coffee or a paper filter. This will remove any dust that may have settled inside the coffee maker.
Operating Instructions
1)Place your coffee maker on a flat, level surface, such as a countertop. Plug the coffee maker into a 120_volt 60Hz AC only outlet.
2)Swing out the filter basket holder(2) to your left and place a filter or paper filter into the filter basket(8). Place the desired amount of ground coffee into the paper filter. Close the filter basket until it snaps in place.
NOTE: Do not operate your coffee maker if the filter basket holder does not close completely. If the filter basket holder does not close completely, check to see that the filter basket is properly seated and snap the door back into its place.
3)Lift and open the water tank lid(1). Then fill the glass carafe(7) with cold water and pour into the water tank(3). You can measure how many cups you want to make by looking at the gauge on the carafe handle or the water gauge(4) on the side of the water tank(3).
4)Close the water tank lid(1) and place the glass carafe(7) on the warming plate(5).
5)Push the “On/Off” switch to turn on the coffee maker and start brewing.
6)The warming plate will stay warm as long as the coffee maker is on. To turn off, push the “On/Off” switch to “Off” position.
Auto
Your coffee maker is equipped with an auto
NOTE: If the glass carafe was removed during the brewing cycle, return it within 30 seconds or the filter basket may overflow.
{PAGE }
