TROUBLESHOOTING
PROBLEM | SOLUTION |
Surface burner fails to light. | • Check to be sure plug is securely inserted into receptacle. |
| • Check or |
| • Check power supply. |
| • Check to be sure burner is correctly rated for your kind of gas. |
| • Check to be sure burner ports or ignition ports are not clogged. |
| • Check to be sure ignitor is dry and clicking. Burner will not light if ignitor is damaged, |
| soiled or wet. If ignitor doesn’t click, turn control knob OFF. |
| • Check to be sure burner cap is correctly seated on the burner base. |
|
|
Surface burner flame lifts | • Check to be sure a pan is sitting on the grate above. |
off ports. | • Contact an authorized |
|
|
The flame is uneven. | • Burner ports may be clogged. |
| • Flame may need to be adjusted. Contact an authorized |
|
|
Surface burner flame is | • Some yellow tips on the flame are acceptable when using LP gas. |
yellow in color. | • Contact an authorized |
|
|
8