BEFORE YOU CALL
CHECK THESE POINTS IF YOUR CLOTHES DRYER...
DOESN’T RUN
•Be sure the door is latched shut.
•Be sure the power cord is plugged into a live electrical outlet.
•Check the home’s circuit breaker and fuses.
•Press the Start button again if the door is opened during the cycle.
DOESN’T HEAT
•Check the home’s circuit breaker and fuses.
•Select a heat setting, not
•On a gas dryer, check that the gas sup- ply is on.
•Clean the lint filter and exhaust duct.
•Dryer timer may have moved into the
DOESN’T DRY
•Check all of the above, plus...
•Be sure the exhaust hood at the outside of the home can open and close freely.
•Check exhaust system for lint
•Use 4” rigid metal exhaust duct.
•Do not overload. 1 Wash load = 1 Dryer load.
•Sort heavy items from lightweight items.
•Large, bulky items like blankets or com- forters may require repositioning to ensure even drying.
•Check that the washer is draining prop- erly to extract adequate water from the load.
•Clothes load is too small to tumble prop- erly. Add a few towels.
IS NOISY
•Check the load for objects such as coins, loose buttons, nails, etc. Remove promptly.
•It is normal to hear the dryer gas valve or heating element cycle on and off during the drying cycle.
•Be sure the dryer is leveled properly as outlined in the installation manual.
•Be sure the rubber feet are installed on the leveling legs.
•A clicking noise may be the timer advancing.
•It is normal for the dryer to hum due to the high velocity of air moving through the dryer drum and exhaust system.
CONTROL KNOB ADVANCES
SLOWLY
•This is normal operation for an IntelliDry cycle, especially at the beginning of the cycle. Once the load begins to dry, the control knob will start to advance. The rate of advancement will be slow at the beginning of the cycle because there is more moisture in the load. As the load becomes more dry, the control knob will advance more quickly.
DRIES UNEVENLY
•Seams, pockets and other similar heavy areas may not be completely dry when the rest of the load has reached the selected dryness level. This is normal. Select the “More Dry” setting if desired.
•If one heavy item is dried with a light- weight load, such as one towel with sheets, it is possible that the heavy item will not be completely dry when the rest of the load has reached the selected dryness level. Sort heavy items from lightweight items for best drying results.
HAS AN ODOR
•Household odors such as from painting, varnishing, strong cleaners, etc. may enter the dryer with the surrounding room air. This is normal as the dryer draws the air from the room, heats it, pulls it through the tumbler and exhausts it to the outside. When these odors are present in the air, ventilate the room completely before using the dryer.
For further assistance contact
Maytag Appliances Sales Company,
Maytag Customer Assistance:
U.S.
U.S. customers using TTY for deaf, hearing impaired or speech impaired, call
10
