Maytag MD-16 warranty Select cycle, Intellidry Wrinkle Free Fabrics

CONTROLS AT A GLANCE

Control features and styling vary by model.

Step 1 Select cycle

INTELLIDRY WRINKLE FREE FABRICS

WITH PRESS CARE automatically senses the mois- ture in the load and shuts off when the selected dryness level is reached. It minimizes wrinkles of synthetic fabrics such as acrylic, nylon, polyester or blends by providing an unheated cool-down period at the end of the cycle. Simply set the control to the desired dryness level (MORE DRY – LESS DRY). The line between MORE DRY and LESS DRY is the initial preferred setting for the majority of loads.

INTELLIDRY REGULAR automatically senses the moisture in the load and shuts off when the selected dryness level is reached. This cycle is designed for loads such as tow- els, underwear, t-shirts, jeans, etc. Set the control to the desired dryness level (MORE DRY – LESS DRY). The line between MORE DRY and LESS DRY is the initial preferred setting for the majority of loads.

WRINKLE RELEASE will release

wrinkles from items that are clean and dry but slightly wrinkled, such as from a crowd- ed closet, packed suitcase or from sitting in the dryer too long after the end of the cycle. It provides 10 minutes of heated tumbling and 5 minutes of cool down tumbling with- out heat.

DAMP DRY is designed to “partially” dry items. It provides approximately 20 minutes of heated tumbling and 5 minutes of cool down tumbling without heat.

DRYEL FABRIC CARE (select mod-

els) is designed for use on dry clean only fabrics in combination with Dryel Dry Clean Only Fabric Care product. Placing the con- trol dial arrow at the DRYEL line will provide the optimal amount of time needed to prop- erly use Dryel. (For more information on using the Dryel cycle, see page 7.)

TIME DRY/AIR FLUFF may be

selected for any load if the IntelliDry sensor system is not desired. Set the control to the desired number of minutes.

NOTE: The dial can be turned in either direction to select a cycle. Once started, the dial will not advance at a spe- cific rate during the IntelliDry cycles. At first the dial may not advance at all. Toward the end of the cycle (when the load begins to dry) the dial will advance at a more regular rate and much more quickly. This is normal operation.

5