Maytag MD-31 Drying Rack select models Installing the Drying Rack, Storing the Drying Rack

Drying Rack (select models)

Installing the Drying Rack:

1.	Open dryer door.
2.	Position drying rack in tumbler placing the two rear
	legs in the two recessed areas in the back wall of the
	dryer.
3.	Place the front lip of the drying rack on top of the lint
	filter.
4.	Place items to be dried on the rack, leaving space
	between them so air can reach all the surfaces.
5.	Close the dryer door.

Handle

6. Use the Time Dry cycle. Select time according to

moisture and weight of item. Start the dryer. It may

be necessary to reset the timer if a longer drying time

is needed.

Front

Rear Legs

Storing the Drying Rack:

On dryer sides:

The drying rack hanger fits between the dryer top and the dryer cabinet.

1.Place the flange on the hanger in the seam between the top and the cabinet. Push all the way in.

2.Face the top of the drying rack toward the side of the dryer cabinet.

3.Place the drying rack handle over the lip of the hanger.

On dryer back:

1.Place the drying rack hanger between the dryer top and the dryer cabinet just below the back of the con- trol panel.

2.Place the flange in the seam and push all the way in.

3.Face the top of the drying rack toward the back of the dryer cabinet.

4.Place the drying rack handle on the lip of the hanger.

NOTE: If not included with your dryer, contact your Maytag dealer for the accessory kit MAL1100AXX or call 1-800-688-8408.

Flange

Lip

SUGGESTED ITEMS	SUGGESTED
	TEMP. SETTINGS
Washable sweaters (block to	Heat
shape and lay flat on rack)
Stuffed toys (cotton or	Heat
polyester fiber filled)
Stuffed toys (foam or	Air Fluff
rubber filled)
Foam rubber pillows	Air Fluff
Sneakers	Air Fluff or Heat

WARNING: Drying foam rubber, plastic or rubber on a heat setting may cause damage to the item and could lead to a fire hazard.

6