Operating Tips
Clean the Lint Filter
•After each load.
•To shorten drying time.
•To operate more energy efficiently.
NOTE: Do not operate the dryer without the lint filter in place.
Load the Dryer Properly
•Place only one washload in the dryer at a time.
•Mixed loads of heavy and lightweight clothes will dry differently. Lightweight clothes will dry, while heavy clothes may be damp.
•Add one or more similar items to the dryer when only one or two articles need drying. This improves the tumbling action and drying efficiency.
•Overloading restricts tumbling action, resulting in uneven drying as well as excessive wrinkling of some fabrics.
•When drying large, bulky items such as a blanket or comforter, it may be necessary to reposition the load during the cycle to ensure even drying.
Care & Cleaning
Control Panel
Clean with a soft, damp cloth. Do not use abrasive sub- stances.
Cabinet
Wipe off any marks with soap and water. Use an appli- ance wax once a year if desired.
Tumbler
Remove any stains such as crayon, ink pen or fabric dye from new items (such as towels or jeans) with an
Dryer Exhaust System
Inspect and clean once a year to maintain optimum per- formance. The outside exhaust hood should be cleaned more frequently to ensure proper operation. (Refer to the Installation Instructions for more information.)
Replacing the Drum Light
Instructions for replacing the bulb:
1.Unplug or disconnect the dryer from the electrical power supply.
2.Open the door and use a Phillips screwdriver to remove the screw attaching the lens to the tumbler front.
3.Remove lens cover by pulling cover toward center of tumbler.
4.Rotate bulb
5.Replace the bulb with a 120 volt, 10 watt maximum candelabra base light bulb.
6.Turn the light bulb clockwise into socket.
7.Replace lens cover by hooking plastic tabs into tum- bler front below the light housing.
8.Reinstall the screw into the lens cover screw hole.
9.Reconnect dryer to power supply.
7
