CONTROLS AT A GLANCE
AUTO CLEAN (Select models)
Manufacturer’s recommended cycle choice for all
Normal dishloads vary from day to day. Auto Clean is recommended because it selects the number of fills and wash time best suited for the soil level of each load. Depending on the number of fills required water usage ranges from 4 to 10 gallons.
HEAVY WASH
Long cycle for heavy food soils. 10 gallons.
NORMAL WASH
Medium cycle for average food soils. Depending on the number of fills, water usage ranges from 4 to 8 gallons.
LIGHT WASH
Short cycle for light food soils. Depending on the number of fills, water usage ranges from 4 to 6 gallons.
RINSE ONLY
Rinses dishes being held until there is a full load. Controls odors. 2 gallons.
NOTE:
❚Cycle times shown in the numerical display (select models) increase or decrease, based on each load’s soil level, water temperature and selected options.
CONTROLS AT A GLANCE
Options
TOUGH SCRUB™ or TOUGH
SCRUB™ PLUS (Select models)
Select Tough Scrub™ or Tough Scrub™ Plus when washing loads with
For
ACCUTEMP (Select models)
final rinse cycle. If necessary, the heating element will turn on and the cycle will be extended to heat water to the proper tem- perature.
Select AccuTemp™ with any cycle (except Rinse Only) to assure proper hot water temperature and to enhance drying results.
SANITIZE (Select models)
Select Sanitize with Auto Clean (select models), Heavy, Normal, or Light Wash to sanitize dishware. At the end of the cycle, when the cycle monitor recognizes that the proper conditions have been met, the SANITIZED light illuminates.
EXTRA RINSE (Select models)
results in hard water situations. The extra rinse is already built into the cycle when Heavy Wash is selected.
HEATED DRY
Select Heated Dry to turn on the heating element during dry for enhanced drying results. When Heated Dry is not selected, towel drying of some items such as plastic and teflon may be necessary and more moisture may be noticed adhering to the dishwasher interior. With either dry option, it is normal to notice vapor escaping from the door vent.
DRAIN/OFF
To drain the dishwasher and then turn it off, press Drain/Off once. Press Drain/Off twice
AccuTemp™ provides a water temperature | Select Extra Rinse to add a rinse to the |
check in the main wash and also in the | cycle. An extra rinse helps to improve |
to turn the dishwasher off without draining.
Indicator Lights
The SANITIZED (select models) light illumi- nates at the end of the cycle when condi- tions have been met to achieve sanitization.
NOTE:
❚When Sanitize is selected, cycles are monitored to assure sanitiza- tion. Unusually low water temper- ature will prevent the sanitization protocol from being satisfied and the SANITIZED light will not illu- minate at the end of the cycle.
The CLEAN light illuminates at the end of the cycle and remains lit until the door has been open for 30 seconds continu- ously.
The DRY light illuminates during the entire dry period and goes out when the cycle is completed.
The WASH light illuminates during all rinse and wash portions of the cycle.
The HEATING DELAY light illuminates when the cycle is being extended to heat the water.
The CLEAN and SANITIZED (select mod- els) indicator lights will not reilluminate after a power failure until after the next cycle is run.
6
