Maytag MGC5430 manual ACleaning CAUTIONS, Cleaning Chart, after each use, possible burns

Models: MGC5430

1 12
Download 12 pages 61.66 Kb
Page 9
Image 9
ACleaning CAUTIONS:

ACleaning CAUTIONS:

Be sure appliance is off and all parts are cool before • To prevent staining or discoloration, clean appliance

handling or cleaning. This is to avoid damage and

after each use.

possible burns•

• If a part is removed, be sure it is correctly replaced.

Parts

Burner Caps

Iand Sealed Gas

Burners

Burner Grates (porcelain on cast iron)

"Control"Kno"bs"....

Cooktop brushed chrome

(select models)

Cleaning Chart

Cleaning Procedure

Allow burner to cool. Remove burner cap and wash in soapy water with a plastic scouring pad or in the dishwasher. Wash burner head with soapy water and a plastic scouring pad. For stubborn soils on the burner cap or head, clean with a soap-filled, nonabrasive pad or Cooktop Cleaning Creme (Part #2000000l ) and a sponge.

For burned on soil, place removeable burner cap on newspapers and spray with commercial oven cleaner. Follow manufacturer's directions.

,Clean gas ports with a straight pin especially the port below the ignitor. Do not enlarge or distort holes.

,Be careful not to get water into burner ports when cleaning burner head.

When cleaning, use care to prevent damage to the ignitor. If the ignitor is soiled, wet or damaged the surface burner will not light.

Wash grates with warm, soapy water and a nonabrasive, plastic scrubbing pad. For stubborn soils, clean with a soap-filled, nonabrasive pad or Cooktop Cleaning Creme (Part #20000001) and a sponge. If soil remains, reapply Cooktop Cleaning Creme, cover with a damp paper towel and soak for 30 minutes. Scrub again. Rinse and dry.

For burned on soils, remove grates, place on newspapers and carefully spray with commercial oven cleaner. (Do not spray surrounding surfaces.) Place in plastic bags for several hours or overnight. Wearing rubber gloves, remove from bags. Wash, rinse, dry and replace on cooktop.

.....................................................

Remove knobs in the OFF position by pulling up,

Wash, rinse and dry. Do not use abrasive cleaning agents as they may scratch the finish,

Turn on each burner to be sure the knobs have been correctly replaced.

° When cool, wash with soap and water, rinse and buff the surface.

For heavier soil use a mild abrasive cleaner such as Soft Scrub*, rubbing with the grain to avoid streaking the surface.

To prevent scratching, do not use abrasive or caustic agents.

To restore luster and remove streaks, follow with Stainless Steel Magic Spray (Part #20000008). Chrome will permanently discolor if soil is allowed to bake on.

more...

8

Page 9
Image 9
Maytag MGC5430 manual ACleaning CAUTIONS, Cleaning Chart, handling or cleaning. This is to avoid damage and, after each use