Maytag MGC6430, MGC6536 dimensions 1111, Connecting Appliance To Gas Supply, Regulator, Shutoff

Models: MGC6536 MGC6430

1 11
Download 11 pages 50.39 Kb
Page 4
Image 4
Connecting Appliance To Gas Supply

Connecting Appliance To Gas Supply

A QUALIFIED SERVICE TECHNICIAN OR GAS APPLIANCE INSTALLER MUST MAKE THE GAS

SUPPLY CONNECTION. Leak testing of the appliance shall be conducted by the installer according to the instructions given.

Gas supply piping MUST conform to all local, municipal and state building codes and local utility regulations.

1.IF NO OTHER APPLIANCE IS TO BE INSTALLED BELOW THIS COOKTOP

Join the appliance pressure regulator supplied with this appliance to the entrance threads of the Gas Manifold. The appliance regulator is marked with a directional arrow indicating correct direction of gas flow. Ensure the appliance regulator is installed with the arrow pointing toward the gas manifold entrance. Tighten the appliance regulator to 20 to 30 ft-lbs of torque.

Never tighten to more than 35 ft-lbs of torque. Always use an approved pipe joint compound resistant to the action of LP gas.

Install the appliance in its counter cutout.

Make the gas connection to the inlet of the appliance pressure regulator with 1/2" NPT male pipe threads.

Install a manual shut-off valve in an accessible location in the gas line ahead of the appliance pressure regulator and external to this appliance for the purpose of turning on or shutting off gas to the appliance.

Make additional pipe connections as necessary ahead of the shut-off valve to the gas supply source. Assure all pipe joint connections are gas tight.

Apply a non-corrosive leak detection fluid to all joints and fittings in the gas connection between the supply line shut-off valve and the cooktop. Include gas fittings and joints in the cooktop if connections were disturbed during installation. Check for leaks! Bubbles appearing around fittings and connections will indicate a leak. If a leak appears, turn off supply line gas shut-off valve, tighten connections, turn on the supply line gas shut off valve, and retest for leaks. Never test for gas leaks with an open flame.

ILLUSTRATIVE GAS SUPPLY PIPING

BURNER BOX

(REAR OF APPLIANCE)

i (NO OTHER APPLIANCE BELOW COOK'FOP)

U

MANIFOLD

(3/8" N.P.T.)

ENTRANCE

 

 

 

!

 

APPLIANCEPRESSURE

,REGULATOR

I

I

ALL SUPPLY SIDE

MANUAL

PIPE JOINTS

SHUTOFF

1/2" N.P.T.

VALVE

F_

I

]1111---

TO GAS

ELBOWINLET

FIGURE3

Page 4
Image 4
Maytag MGC6430 1111, Connecting Appliance To Gas Supply, Illustrative Gas Supply Piping Burner Box, Regulator, Shutoff