Surface Cooking, cont.
Model MGC6430
1
2
3
4
1.Left rear burner (9,200 BTUs).
2.Right rear burner (5,000 BTUs on HI, 650 BTUs on LO).
3.Left front burner (9,200 BTUs).
4.Right front burner (12,500 BTUs).
Model MGC6536
1
2
3
4
5
1. | Left rear burner (10,500 BTUs). |
2. | Right rear burner (9,200 BTUs). |
3. | Center burner (5,000 BTUs on HI, |
| 650 BTUs on LO). |
SEALED BURNERS
Thesealedburnersaresecuredtothecooktop and are not designed to be removed. Since the burners are sealed into the cooktop, boilovers or spills will not seep underneath the cooktop.
However,theburnersshouldbecleanedafter each use. The head portion of the burner has a removable cap that is easily removed for cleaning. (See page 6 for cleaning direc- tions.)
Burner caps must be correctly placed on the burnerbaseforproperoperationoftheburner.
HIGH PERFORMANCE BURNER*
There is one high speed burner on your cooktop, located in the right front position. This burner offers higher speed cooking that can be used to quickly bring water to a boil and for
SIMMER BURNER*
This burner is located in the center or right rear position. The simmer burner offers a lower BTU flame for delicate sauces or melting chocolate.
* BTU ratings will vary when using LP gas.BURNER GRATES
The grates must be properly positioned be- fore cooking. To ensure proper positioning, align bumpers on grate bottom with the indentations in the cooktop.
Do not operate the burners without a pan on the grate. The grate’s porcelain finish may chip without a pan to absorb the heat from the burner flame.
Although the burner grates are durable, they will gradually lose their shine and/or discolor, due to the high temperatures of the gas flame.
4. | Left front burner (9,200 BTUs). |
5. | Right front burner (12,500 BTUs). |
Topreventthecooktopfromdiscoloringor staining:
➢Clean cooktop after each use.
➢Wipe acidic or sugary spills as soon as the cooktop has cooled as these spills may discolor the surface.
NOTES:
➢Aproperlyadjustedburnerwithcleanportswilllightwithinafewseconds.Ifusingnatural gas, the flame will be blue with a deeper blue inner cone.
If the burner flame is yellow or is noisy, the air/gas mixture may be incorrect. Contact a service technician to adjust. (Adjustments are not covered by the warranty.)
With LP gas, some yellow tips on the flames are acceptable. This is normal and adjustment is not necessary.
➢With some types of gas, you may hear a “popping” sound when the surface burner is turned off. This is a normal operating sound of the burner.
➢To improve cooking efficiency and to prevent possible damage to the cooktop or pan, the flame must be adjusted so it does not extend beyond the edge of the pan.
5
