Operating Basics
Time-of-Day Clock
Basic Instructions
1.Touch the Clock/Auto Start Pad. The Display will show “12H”.
2.Set the time of day by touching the appropriate numbers. The set time will flash.
3.Touch the Clock/Auto Start Pad. The set numbers will stop flashing, however, the colon continues to flash.
•After plugging in the oven or after a power outage, the Display will show “:0”. Set the clock following the directions above.
•The
•If set, the time of day will always be displayed when no other cooking function is being used.
Time Cooking
Basic Instructions
1.Enter the cooking time by using the number pads. For example, for 1 1/2 minutes touch numbers 1, 3, 0.*
2.Touch the Start Pad.
•The cooking time will appear in the Display Window.
•The oven will start cooking and time countdown will begin.
•The oven will stop automatically when the time is done and beep three times.
•The time of day will reappear in the Display.
*Note: Full power is automatic. If you wish to use a dif- ferent power level, follow the instructions on page 7.
•Start with the shortest recommended time and add more time as needed.
•Check the food as it cooks.
•The oven door can be opened any time during oper- ation. It will automatically stop and maintain the time setting until the door is closed and the Start Pad is touched again.
Quick 30 Seconds
The Quick 30 Seconds Pad provides a convenient way to heat foods at full power with one touch of a pad. The microwave starts automatically after the pad is touched. By repeatedly touching the pad, you can heat foods from 30 seconds to 5 minutes.
6
