Useful Information
Character entry
The dial keys are used to enter characters and numbers. Each dial key has multiple characters assigned to it. The characters that can be entered depend on the character entry mode (page 38).
–Press MFN or MEN to move the cursor left or right.
–Press dial keys to enter characters and numbers.
–Press 
to erase the character or number highlighted by the cursor. Press and hold 
to erase all characters or numbers.
–Press * (Aaa) to switch between uppercase and lowercase.
–To enter another character located on the same dial key, press MEN to move the cursor to the next space, then press the appropriate dial key.
–If you do not press any dial key within 5 seconds after entering a character, the character is fixed and the cursor moves to the next space.
Character entry modes
The available character entry modes are Alphabet (ABC), Numeric 
),
Extended 1 (
), Extended 2 (
), and Cyrillic (
). For SMS messages, Alphabet (ABC),
Numeric 
), and Extended 1 (
) modes are available. When in these entry modes except Numeric, you can select which character is entered by pressing a dial key repeatedly.
When the unit displays the character entry screen:
a MbN: Select a character entry mode. a 
Note:
R
in the following tables represents a single space.
RThe dial keys with *1, *2, and *3 in the following tables have different character assignment for SMS. See the footnotes with *1, *2, and *3.
Alphabet character table (ABC)
z 1 2 3 4 5 6 7 8 9 y |
Numeric entry table (0-9)
z 1 2 3 4 5 6 7 8 9 y
38
TG6711FX(en)_0130_ver002.pdf 38
2012/01/30 18:56:55
