Panasonic KX-TG6711FX operating instructions Error messages, Display message, Cause/solution

Useful Information

1

4

9

Error messages

Display message

Base no power

or

No link. Reconnect AC adaptor.

or

No link.

Check Phone Line

Failed

Incomplete

Invalid Number

Memory Full

Use rechargeable battery.

You must first subscribe to Caller ID.

Cause/solution

RThe handset has lost communication with the base unit. Move closer to the base unit and try again.

RUnplug the base unit’s AC adaptor to reset the unit. Reconnect the adaptor and try again.

RThe handset’s registration may have been cancelled. Re-register the handset (page 29).

RWhen “No link.” is displayed during a power failure, place a handset on the base unit to supply power to the base unit.

RThe supplied telephone line cord has not been connected yet or not connected properly. Check the connections (page 9).

RPhonebook copy failed (page 21). Confirm the other handset (the receiver) is in standby mode and try again.

RThe receiver’s phonebook memory is full. Erase the unwanted phonebook entries from the other handset (the receiver) and try again.

RYou tried to send an SMS message to a phone number saved in the phonebook, caller list, or redial list that is over 20 digits long.

RThe phonebook memory is full. Erase unwanted entries (page 20).

RThe call barred list memory is full. Erase unwanted entries (page 27).

RA wrong type of battery such as Alkaline or Manganese was inserted. Use only the rechargeable Ni-MH batteries noted on page 3, 6.

RYou must subscribe to a Caller ID service. Once you receive caller information after subscribing to a Caller ID service, this message will not be displayed.

40

TG6711FX(en)_0130_ver002.pdf 40

2012/01/30 18:56:55