Error Code Message Information
HWC1009 | Message | The backplane is absent. |
| ||
| LCD Message The backplane is absent. Check hardware. | |
| Details | The backplane may be necessary for proper operation. System functionality may be |
|
| degraded. |
| Action | If removal was unintended, check presence, then reinstall or reconnect. |
HWC1010 | Message | The backplane is disabled. |
| ||
| Action | If disabled unexpectedly, |
HWC1015 | Message | The mezzanine card <number> is absent. |
| ||
| Details | The mezzanine card may be necessary for proper operation. System functionality may be |
|
| degraded. |
| Action | If removal was unintended, check presence, then reinstall or reconnect. |
HWC2006 | Message | The <name> is not installed correctly. |
| ||
| LCD Message The <name> is not installed correctly. Check connection. | |
| Details | The device may be necessary for proper operation. System functionality may be |
|
| degraded. |
| Action | Check presence, then |
HWC2008 | Message | A fabric mismatch detected between IOM and mezzanine card <number>. |
| ||
| Details | The fabric type for the IOM and mezzanine cards must match. |
| Action | Check chassis fabric type in CMC GUI and compare to the type of IOM or mezzanine card. |
HWC2011 | Message | The riser board cable or interconnect is not connected, or is improperly connected. |
| ||
| LCD Message Riser board cable or interconnect failure. Check connection. | |
| Details | The riser blade cable may be necessary for proper operation. System functionality may |
|
| be degraded. |
| Action | Check the riser board or interconnect presence, then reinstall or reconnect. |
HWC3000 | Message | The <name> is removed. |
| ||
| Details | The removed device may be necessary for proper operation. System functionality may be |
|
| degraded. |
| Action | If removal was unintended, check presence of the removed device, then reinstall or |
|
| reconnect |
HWC3002 | Message | Server <number> is removed. |
|
78