Error Code Message Information
HWC5006
HWC5008
HWC5010
HWC5014
HWC5031
HWC5032
HWC5034
HWC5036
HWC6000
HWC6002
Action | Update the CMC firmware. If the issue persists, see Getting Help. |
Message | A failure is detected on <name>. |
Action | If the issue persists, see Getting Help. |
Message | Console is not available for the <name>. |
Action | If the issue persists, see Getting Help. |
Message | <name> cannot detect any hosts. |
Action | If the issue persists, see Getting Help. |
Message | <name> is not functional and is powered off. |
Action | If the issue persists, see Getting Help. |
Message | IO module <number> is offline. |
Details | The CMC has powered off the IOM. |
Action | If the issue persists, see Getting Help. |
Message | A fabric mismatch detected on IO module <number>. |
Details | The fabric type for IOM's on the same chassis fabric must match. |
Action | Check chassis fabric type in CMC GUI and compare to the type of both IOM's. |
Message | A link tuning failure detected on IO module <number>. |
Details | Link tuning table not supported for this IO modular. |
Action | Update the CMC firmware. If the issue persists, see Getting Help. |
Message | A failure is detected on IO module <number>. |
Details | The IOM module performance may be impacted. |
Action | If the issue persists, see Getting Help. |
Message | The <name> controller is offline. |
Details | Information and status from the controller is unavailable. |
Action | Remove and reapply input power. If the issue persists, see Getting Help. |
Message | The <name> controller is stuck in boot mode. |
Details | Information and status from the controller is unavailable. |
80
