Error Code Message Information
TMP0126
TMP0128
TMP0130
TMP0132
TMP0134
VLT0100
Details | Ambient air temperature is too cool. |
Action | Check the system operating environment. |
Message | Disk drive bay temperature is greater than the upper warning threshold. |
LCD Message | Disk drive bay temperature is outside of range. Check Fans. |
Details | Ambient air temperature is too warm or one or more fans may have failed. |
Action | Check the system operating environment and review event log for fan failures. |
Message | Disk drive bay temperature is outside of the allowable range. |
LCD Message | Disk drive bay temperature is outside of range. Check Fans. |
Details | Ambient air temperature is too warm or cool. |
Action | Check the system operating environment and review event log for fan failures. |
Message | The control panel temperature is less than the lower warning threshold. |
LCD Message | Control panel temperature is outside of range. |
Details | Ambient air temperature is too cool. |
Action | Check the system operating environment. |
Message | The control panel temperature is greater than the upper warning threshold. |
LCD Message | Control panel temperature is outside of range. |
Details | Ambient air temperature is too warm or one or more fans may have failed. |
Action | Check the system operating environment and review event log for fan failures. |
Message | The control panel temperature is outside of the allowable range. |
LCD Message | Control panel temperature is outside of range. |
Details | Ambient air temperature is too warm or cool. |
Action | Check the system operating environment and review event log for fan failures. |
Message | Processor module <name> voltage is less than the lower warning threshold. |
LCD Message | Processor module <name> voltage is outside of range. |
Details | System hardware detected an over voltage or under voltage condition. |
| If multiple voltage exceptions occur consecutively the system may power down in fail- |
| safe mode. |
Action | 1. Review system logs for power supply exceptions. |
| |
| 2. Remove the processor module. Inspect processor socket for bent pins. |
109