Panasonic KX-TG8070HK Base unit settings, Ringtone Call Options Dial Mode, Recall/Flash

hBase Unit Settings

Base unit settings

To customise the base unit:

1{MENU} (right soft key)

2Select hby pressing {^}, {V}, {<}, or {>}. i{OK}

3Enter the base unit PIN (Personal Identification Number; default: “0000”). i{OK}

4Press {^} or {V} to select the desired item in the base unit settings menu. i{OK}

5Press {^} or {V} to select the desired item in the sub-menu. i{OK}

6Press {^} or {V} to select the desired setting then press {OK}.

L This step may vary depending on the feature being programmed. L To exit the operation, press {i}.

Note:

L Use the handset to customise the base unit.

L The selected item is highlighted on the display. The currently activated setting is indicated by “t” located on the left of the item on the display.

Menu	Sub-menu	Details (default setting)
Ringer Setup	Ringer Volume	For base unit (“Volume 3”)
	Ringtone	(“Ringtone 1”)
Call Options	Dial Mode	(“Tone”): page 11
	Recall/Flash	Flash time (“400 msec.”)*1
	PBX Access No.	Enter the 1-digit code. i{OK}*2
Base Unit PIN	—	Change base unit PIN (“0000”).*3
		– Enter the new 4-digit base unit PIN.*4 i
		{OK}
		– Enter the new 4-digit base unit PIN again.
		i{OK}

*1 Change the flash time, if necessary, depending on the requirements of your service provider/telephone company or PBX.

*2 If you store the PBX access number, a pause will be added automatically between the PBX access number and the first digit of the phone number when you make calls.

*3 If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you. *4 If you forget your PIN, consult your nearest Panasonic service centre.

17