Preparation
Dialling mode (tone/pulse)
Change the dialling mode depending on your telephone line service.
“Tone”: Select when you have a
“Pulse”: Select when you have rotary/pulse service.
1{MENU} (right soft key)
2Select hby pressing {^}, {V}, {<}, or {>}.
i{OK}
3Enter the base unit PIN (default: “0000”). i
{OK}
L If you forget your PIN, consult your nearest Panasonic service centre.
4Press {^} or {V} to select “Call Options”.
i{OK}
5Press {^} or {V} to select “Dial Mode”. i
{OK}
6Press {^} or {V} to select the desired setting.
i{OK} i{i}
Date and time
1{MENU} (right soft key)
2Select rby pressing {^}, {V}, {<}, or {>}.
i{OK}
3Press {^} or {V} to select “Set Date & Time”. i{OK}
4Enter the current date, month, and year. i
{OK}
Example: 17 May, 2007
{1}{7} {0}{5} {0}{7}
L You can select the format by pressing {#}:
–
–
–
–
5Enter the current hour and minute. Example: 3:30 PM
{0}{3} {3}{0} iPress {*} until “03:30PM” is displayed.
6{OK} i{i}
Note:
LTo correct a digit, press {<} or {>} to move the cursor to the digit, then make the correction.
L The date and time will be reset on the handset display after a power failure. In this case, set the date and time again.
11
