Manuals / Dell / Computer Equipment / Computer Hardware

Dell QHB owner manual Error Code Message Information HWC3004 HWC4000 Action, LCD Message

Models: QHB

1 121

Download 121 pages 28.19 Kb

Page 79

Error Code Message Information

HWC3004

HWC4000

Action

If removal was unintended, check presence of the server, then reinsert.

Message IO module <number> is removed.

Action If removal was unintended, check presence of the IO module, then reinsert.

Message	A hardware incompatibility detected between BMC/iDRAC firmware and CPU.
LCD Message	Incompatibility between BMC/iDRAC firmware and CPU. Update firmware.
Details	A hardware incompatibility was detected between BMC/iDRAC firmware and
	Processor(s). An iDRAC or BMC firmware update is needed.
Action	Update the BMC/iDRAC firmware. If the issue persists, see Getting Help.

HWC4002

HWC4011

HWC4013

HWC4015

HWC5001

HWC5002

HWC5004

Message	A hardware incompatibility detected between BMC/iDRAC firmware and other hardware.
Details	A hardware incompatibility was detected between BMC/iDRAC firmware and other
	hardware. An iDRAC or BMC firmware update is needed.
Action	Update the BMC/iDRAC firmware. If the issue persists, see Getting Help.
Message	Hardware unsuccessfully updated for mezzanine card <number>.
Action	Check presence of the hardware, reinstall or reconnect, then reattempt the update. If the
	issue persists, see Getting Help.
Message	Hardware unsuccessfully updated for embedded NIC.
Action	Check presence, reinstall or reconnect, then reattempt the update. If the issue persists, see
	Getting Help.
Message	Link Tuning error detected.
Details	CMC has old firmware. After updating the firmware the CMC will recognize the device.
Action	Update the CMC firmware. If the issue persists, see Getting Help.
Message	<name> is offline.
Action	If unexpected, check presence, then reinstall or reconnect.
Message	A fabric mismatch detected on <name>.
Details	The fabric type for the IOM and mezzanine cards must match.
Action	Check chassis fabric type in CMC GUI and compare to the type of IOM or mezzanine card.
Message	A link tuning failure detected on <name>.
Details	CMC has old firmware. After updating the firmware the CMC will recognize the device.

79

Image 79

Dell QHB owner manual Error Code Message Information HWC3004 HWC4000 Action, LCD Message

Contents

Regulatory Model QHB Regulatory Type QHB Series Page Contents Installing Blade Components Technical Specifications System Messages Troubleshooting Your SystemUsing System Diagnostics Jumpers And Connectors121 Overview About Your SystemSolid State Drive Features Front-Panel Features And IndicatorsFor insertion or removal during this time SSD FeaturesOther Information You May Need Keystroke Description Choosing The System Boot ModeUsing The System Setup Navigation Keys Entering System SetupSystem Setup Options Responding To Error MessagesSystem Information Screen System Bios ScreenProcessor Settings Screen Memory Settings ScreenBoot Settings Screen Serial Communications Screen Integrated Devices ScreenSystem Profile Settings Screen System Security Screen Miscellaneous SettingsAssigning a System And/Or Setup Password System And Setup Password FeaturesUsing Your System Password To Secure Your System Key Description Entering The Uefi Boot ManagerOperating With a Setup Password Enabled Using The Boot Manager Navigation KeysUefi Boot Menu Boot Manager ScreenEmbedded System Management Entering The iDRAC Settings Utility IDRAC Settings UtilitySystem Setup Main Menu page, click iDRAC Settings Page Recommended Tools Removing And Installing a SleeveRemoving The Sleeve Removing and Installing a Sleeve Installing The SleeveInstalling a Blade Removing And Installing a BladeRemoving a Blade Inside The Blade Mezzanine Card Installation GuidelinesModule Mezzanine Card Remove the blade from the sleeve Removing a Mezzanine CardRemoving and Installing a Mezzanine Blank Installing a Mezzanine CardLOM Riser Card Installing The LOM Riser CardRemoving The LOM Riser Card Removing a Solid State Drive Solid State DrivesRemoving An SSD From The SSD Carrier Installing a Solid State DriveShutdown Procedure For Servicing a Solid State Drive Configuring The Boot DriveSolid State Drive Backplane Installing An SSD In The SSD CarrierRemoving The SSD Backplane Removing and Installing the SSD Backplane Installing The SSD BackplaneRemoving a Processor ProcessorsRemoving and Installing a Heat Sink Removing and Installing a Processor Installing a ProcessorReplacing The Nvram Backup Battery Nvram Backup BatteryRemoving The Blade System Board System BoardRemoving and Installing the Blade System Board Installing The Blade System BoardRemoving a Processor/DIMM Blank Processor/DIMM BlankSystem Memory Installing a Processor/DIMM BlankMemory Socket Locations ProcessorMode-Specific Guidelines General Memory Module Installation GuidelinesMemory Mirroring Sample Memory ConfigurationsRemoving Memory Modules Installing Memory Modules Removing The Management Riser Card Management Riser CardReplacing The SD Card Installing The Management Riser CardReplacing the SD Card Replacing The SD vFlash CardSD vFlash card SD vFlash card slot Troubleshooting Your System Troubleshooting USB Devices Troubleshooting Solid State DrivesTroubleshooting An Internal SD Card Troubleshooting The Blade System Board Troubleshooting ProcessorsTroubleshooting The Nvram Backup Battery When To Use The Embedded System Diagnostics Dell Online Diagnostics Dell Embedded System DiagnosticsRunning The Embedded System Diagnostics Menu Description System Diagnostic ControlsResults Connector Description System Board Jumper SettingsSystem Board Connectors Jumper SettingDisabling a Forgotten Password Drives ConnectorsMemory RAID ControllerEnvironmental BatteryRemoving LCD Messages System Error MessagesLCD Status Messages Viewing LCD MessagesAMP0303 Message Error Code Message Information ActionAMP0301 Message AMP0302 Message Details ActionAMP0308 Message Details Action Error Code Message InformationAMP0306 Message Details Action AMP0307 MessageAMP0314 Message Details Action Details ActionAMP0312 Message Details Action AMP0313 MessageAMP0320 Message Details Action AMP0316 MessageAMP0318 Message Details Action AMP0319 Message Details ActionASR0000 ASR0001 ASR0002 ASR0003 ASR0008 Page Action Reinstall the system board battery Error Code Message Information ASR0106Message System board battery has failed LCD Message Message System board battery is absent LCD MessageCPU0000 CPU0001 CPU0002 CPU0003 CPU0004 Message Details Unsupported backplane configuration ActionMessage CPU number configuration is unsupported LCD Message Error Code Message Information CPU0005 CPU0006CPU0008 CPU0010 CPU0023 CPU0100 CPU0101 Message CPU0202 Message Error Code Message Information CPU0102Details System performance may be degraded Action CPU0201 MessageCPU0701 Message CPU0203 MessageCPU0204 Message CPU0700 MessageCPU0703 Message CPU0702 MessageCPU0704 Message CPU0804 Message CPU0801 MessageCPU0802 Message Details Action CPU0803 MessageHWC1001 Message Error Code Message Information CPU0805CPU0806 Message CPU0816 MessageHWC2006 Message Error Code Message Information HWC1009HWC1010 Message HWC1015 MessageLCD Message Error Code Message Information HWC3004 HWC4000 ActionFailure is detected on name Name controller is booting MEM0003 Message MEM0000MEM0001 Message MEM0002 MessageMEM0701 Message Error Code Message Information MEM0009MEM0010 Message MEM0022 MessageMEM1206 Message Error Code Message Information DetailsMEM1016 Message MEM1205 MessageError Code Message Information LCD Message OSE1011 OSE1013 PCI1302 PCI1304 PCI1306 PCI1308 PCI1310 Bootable. See system video for additional informationNext scheduled service time An I/O channel check error was detected. Power cycle system PCI2000 PCI2002 PCI3000 PCI3002 PCI3004 Message PCI1362 MessageService window PDR1002 PDR1016 PDR1024 PST0128 PST0129 PDR1001 MessagePower. If the issue persists, see Getting Help PowerMessage Information Message Intel Trusted Execution Technology TXT fatal error Reduce system configuration to minimum memory configurationConfiguration. a socketed TPM module may have been removed Post fatal error detected PSU0007 PSU0008 PSU0016 PSU0031 PSU1201 PSU1202 Error Code Message Information PSU0006Operations Redundancy. If a power supply fails the system may shutdownConsumption PSU1204 MessageAction If unintended, reinstall the flash media Error Code Message Information PWR1005From a power shutdown System configurationRFM1014 Message Error Code Message Information RFM1008Action Replace the failed SD card Error Code Message Information RFM2004 TXT error at boot Some management software do not report platform exceptions Overwritten and lostCall support Additional information. Ipmi sensor type code 1eh offset 00h CMC Ambient air temperature is too cool TMP0110 TMP0112 TMP0113 TMP0114 TMP0115 Message TMP0109 MessageSystem inlet temperature is outside of range Action Review system logs for power supply exceptions Safe modeVLT0104 Message VLT0101 MessageVLT0102 Message VLT0103 MessageVLT0203 Message VLT0200 MessageVLT0201 Message VLT0202 MessageVLT0206 Message VLT0204 MessageVLT0207 Message VLT0212 Message Error Code Message Information VLT0208VLT0209 Message VLT0210 MessageVLT0216 Message VLT0213 MessageVLT0214 Message VLT0215 MessageVLT0220 Message Error Code Message Information Details ActionVLT0218 Message VLT0219 MessageVLT0225 Message Error Code Message Information VLT0221VLT0222 Message VLT0224 MessageVLT0230 Message VLT0226 MessageVLT0227 Message VLT0228 MessageVLT0234 Message VLT0231 MessageVLT0232 Message VLT0233 MessageAlert Messages Diagnostic Messages120 Visit support.dell.com Contacting Dell