Dell QHB owner manual Service window

Error Code Message Information

PCI3006	Message	Failed to get Link Tuning or FlexAddress data from iDRAC.
	Details	Either the BIOS or BMC/iDRAC firmware is out of date and does not support FlexAddress.
	Action	Update BIOS, and BMC/iDRAC firmware. If the issue persists, see Getting Help.

PCI3008

PCI3010

PCI3012

PCI3014

PDR0001

PDR0002

PDR0016

Message	A non-fatal PCIe error detected on a component at bus <bus>device<device>function
	<func>.
Details	System performance may be degraded.
Action	Cycle input power, update component drivers, remove and reinstall the device at the next
	service window.
Message	A non-fatal IO error detected on a component at bus <bus>device<device>function <func>.
Details	System performance may be degraded.
Action	Cycle input power, update component drivers, remove and reinstall the device at the next
	service window.
Message	The QuickPath Interconnect (QPI) width degraded.
Details	System performance may be degraded. The bus is not operating at maximum speed or
	width.
Action	Reset the system, if the problem persists reinstall processors.
Message	A non-fatal PCIe error detected on a component at slot <number>.
Details	System performance may be degraded.
Action	Cycle input power, update component drivers, remove and reinstall the device at the next
	scheduled service time.
Message		Fault detected on drive <number>.
LCD Message		Fault detected on drive <number>. Check drive.
Details		The controller detected a failure on the disk and has taken the disk offline.
Action		Remove and re-seat the failed disk. If the issue persists, see Getting Help.
Message	A predictive failure detected on drive <number>.
Details	The controller received a SMART error from the drive. The drive is operational but needs
	replacement.
Action	The drive will need replacement at the next service window.
Message		Drive <number> is removed.

LCD Message Drive <number> is removed. Check drive.

90