Model, 4200 | Maytag mwf4100aws specs

MAYTAG Whole Home Water Filtration System and to ensure the limited warranty protection remains in effect.

Table 2 outlines the maintenance schedule that should be followed for each Model of the MAYTAG Whole Home Water Filtration System:

Table 2 – MAYTAG Whole Home Water Filtration System Maintenance Schedule

		Required service	Part No.	Comments	Every 12 Mo.

				Water sources with high levels
		Carbon Prefilter	67500001	of particulate, usage and/or	Replace
	AWS	Carbon Prefilter	67500001	chlorine will require more	Replace
				chlorine will require more
				frequent changes.


	4100	System cleaning	--		Clean
	4100
	MWF	Integrity testing*	--		Test
	MWF
	Model
		Backpulse Tank air	67500013	Adjust air pressure as	Test
		pressure	67500013	required**	Test
		pressure		required**

		Base Controller	--	Check timer and program	Replace
		batteries: 2AA	--	settings	Replace
		batteries: 2AA		settings

		Stainless Steel	67500002	Water sources having	Clean
		Stainless Steel		significant sediment will require
	AWS	Prefilter		significant sediment will require
		Prefilter		more frequent cleaning.
				more frequent cleaning.

		System cleaning	--		Clean
	4200	System cleaning	--		Clean


	MWF	Integrity testing*	--		Test

		Backpulse Tank air		Adjust air pressure as
	Model	Backpulse Tank air	67500013	Adjust air pressure as	Test
		pressure	67500013	required**	Test
		pressure		required**

		Base Controller	--	Check timer and program	Replace
		Base Controller		Check timer and program
		batteries: 2AA		settings
		batteries: 2AA		settings

*MAYTAG Services Qualified Service Technician must conduct an Integrity Test annually in order to validate the limited warranty.

**BP tank pressure setpoint is recorded on page 2.

MAYTAG Whole Home Water Filtration System Owners Manual MA1-5

November 2003

13

Image 13

Maytag mwf4100aws owner manual Model, 4200

Contents

Table of Contents Important see safety warnings and cautions inside Dealer and System Information Thank you… Safety Instructions Using this Manual … Service and Maintenance Safety Operational Safety Winter Storage Other Safety Precautions Photo Models MWF4200AWS and MWF4300AWS Certifications and Testing Model MWF4100AWS Legal Disclaimer Service Trademarks System Description Replacement Parts Startup of a new Maytag Whole Home Water Filtration System Maintenance ScheduleSanitizing Your Household Distribution System Model 41004200 4300 Required service Comments Every 6 mo Every 12 Mo MWF4300AWS Drain the System for 1 minute Shut off water Remove the cap and internal prefilter from the System CleaningStainless Steel Prefilter Re-install Internal Model Cleaning Chemical UsedSoak 60 min Fill and Flush for 30 min Replacing the External Sediment Prefilter Cartridge Stopcock Page Base Controller Models MWF4100AWS and MWF4200AWS Setting the Controller Advanced Controller Model MWF4300AWS Choosing a Controller ProgramBase Controller Advanced Controller Winterization Procedure November Drain line components for all models System Before Winter Freeze-up Inlet line components for MWF4300AWS November Spring startup and cleansing Prefilter November Cleaning the Stainless Steel Casing Annual Maintenance ChecklistFrequently Asked Questions Does the System require electricity? Possible causes of low water pressure Problem SolutionDoes the System affect the water pressure? What can be done to increase my water pressure? How long does the automatic cleaning cycle take? What happens if the power goes out?What are the maintenance requirements? How much water is used for flushing? Can it be shut down in winter? How long does the Carbon Prefilter last?What happens if there is a boil water alert in my area? November Section Problem/Situation Correction/Action System Troubleshooting Section Problem/Situation Correction/Action System 41/6 34/9 Filtration System Warranty Schedule Suggested List Maytag Whole Home Water Filtration System Limited WarrantyPro-rated cost to the homeowner as a % November November