USING THE CONTROLS
Step 2
Control features vary by model.
SELECT WASH/RINSE WATER TEMPERATURES
Press the arrow pad to select the wash and rinse water temperatures. Follow the garment care label and chart below for best results.
Sanitary/Cold (select models) – Heavily soiled, colorfast items. Only available with the Sanitary cycle.
Hot/Cold – Whites and heavily soiled
ATC Warm/Warm –
ATC Cold/Cold – Brightly colored, lightly soiled items.
Cold/Cold – Brightly colored, very lightly soiled items; washable woolens.
IMPORTANT: The washer features an automatic temperature control (ATC) to provide a warm wash of approximately 105˚ F, a cold wash of approximately 65˚ F and a warm rinse of approximately 80º F in the final rinse only on the ATC temperature selections.
REMEMBER: In wash water temperatures below 65˚ F, detergents do not dissolve well or clean well.
Step 3
SELECT SPIN SPEED
Press the arrow pad to select the spin speed.
Max Extract or Max Extract Plus (select models) – Use for heavy loads such as towels and bedding. Removes more water from loads during spin.
FABRICS NOTE: To minimize wrinkling of wrinkle free and
High (select models) – Use for underwear,
Medium – Use for jeans, wrinkle free or
Gentle – Use for items that will be hung up or laid flat to dry.
Low – Use for delicate items needing a slow spin speed because of fabric and construction.
Drain Only (select models) – Drains the washer without spinning. Use for extremely delicate items that cannot tolerate any spin.
5