USING THE CONTROLS
Control features vary by model.
ESTIMATED TIME DISPLAY (SELECT MODELS)
After setting the cycle and pressing Cycle Selector dial, the display will show the estimated minutes remaining in the cycle.The estimated time remaining may fluctuate to better indicate the wash time left in the cycle.
INDICATOR LIGHTS
Door Lock – lights whenever the door of the clothes washer is locked.The door can be unlocked by pressing the Cycle Selector dial to pause the washer.
Control Lock – The washer controls can be locked to prevent unwanted use by children.
1. Press the Wash/Rinse Temp and Spin Speed pads at the same time for three seconds.
2.The Control Lock light will illuminate.
3.To unlock, press the Wash/Rinse Temp and Spin Speed pads at the same time for three seconds.The Control Lock light will go out.
Cycle Indicator Lights – The Wash, Rinse and Spin lights at the top of the control panel will illuminate progressively to indicate when the washer is in those portions of the cycle.These lights will flash when the cycle has been paused.
Pad Indicator Lights – The indicator lights above the pads will illuminate when the pad is selected.
Cycle Setting Indicator Lights – Indicator lights by the cycle settings will illuminate when the selection is made.
WATER USE
INTELLIFILLTM WATER LEVEL CONTROL
The amount of water used will vary with each load.The Maytag Neptune® clothes washer will automatically provide the appropriate amount of water for efficient cleaning performance and conservation of water and energy. Fill time will vary depending on water pressure.
8
