Cleaning the Dispensers (Cont.)
Removing the Fabric Softener Dispenser
1.Grasp the comer lip of the t:abric softener dispenser. Lift the dispenser up and tip it to the left to avoid hit- ting the washer frame. (Illustration #1)
,Under the t:abric softener dispenser in the dispensing compartment is an overflow grate. Grasp the overflow
grate by the word "CAUTION" and pull it up and out
of the dispensing compartment. (Illustration #2)
. Take the fabric softener dispenser and the overflow grate to the sink. Be careful, there may be fabric soft- ener left in the dispenser. Lift the light blue siphon cap out of the fabric softener dispenser. (Illustration #3)
Replacing the Fabric Softener Dispenser
1.Grasp the overflow grate so the word "CAUTION"
can be read. Place it in the dispensing compartment as shown in illustration #4.
2.Place the light blue siphon cap over the stand pipe in the t:abric softener dispenser. It should t:all into place. (Illustration #5)
3.Grasp the corner lip of the t:abric softener dispenser. Tilt it slightly to the left and insert it back into the dis-
penser compartment. (Illustration #6)
