Maytag SL-3 warranty Adding Fabric Softener

2. Avoid splashing or over-filling the compartment.

Over-filling the compartment will release the chlo- rine bleach into the clothes washer too early.

NOTE:

Never pour undiluted liquid chlorine bleach directly onto the load or into the tub. It is a powerful chemi- cal and can cause fabric damage, such as weakening of the fibers or color loss, if not used properly.

If you prefer to use color-safe, non-chlorine bleach, add it with the detergent. Do not pour color-safe

bleach into the liquid chlorine bleach compart- ment.

Adding Fabric Softener

This compartment automatically dilutes and releases liq- uid fabric softener at the proper time during the cycle. Follow these steps when using liquid t:abric softener:

1.Pour liquid fabric softener into the fabric softener

compartment using the amount recommended on the package.

2.Fabric softener may be diluted with warm water until

it reaches the MAX FILL DILUTED line on the

compartment. Do not fill the liquid fabric softener

compartment above the MAX FILL DILUTED

line. If the compartment is filled above the MAX

FILL DILUTED line, it will enter the clothes washer too early.

NOTE:

Never pour fabric softener directly on the load. It may leave spots and stains.

Use the fabric softener compartment only for liquid fabric softeners.

•Using the Downy Ball* is not recommended with this washer. It will be ineffective in reducing static cling and providing softness.

7

*Brand names are trademarks of the respective mam_cture_