Burner input requirements

Elevations above 10,000 ft (3,048 m):

„When installed above 10,000 ft (3,048 m) a 4% reduction of the burner Btu rating shown on the model/serial number plate is required for each 1,000 ft (305 m) increase in elevation.

Gas supply pressure testing

„The dryer must be disconnected from the gas supply piping system during pressure testing at pressures greater than ½ psi.

Dryer gas pipe

The gas pipe that comes out through the rear of your dryer has a 3/8” male pipe thread.

B

*6¼" (15.9 cm)

A

 

1½"

 

 

(3.8 cm)

A. ½" NPT gas supply line

B. 3/8” NPT dryer pipe

*NOTE: If the dryer is mounted on a pedestal, the gas pipe height must be an additional 10" (25.4 cm) or 15.5" (39.4 cm) from the floor, depending on the pedestal model. For a garage installation, the gas pipe height must be an additional 18" (46 cm) from the floor.

Venting Requirements

WARNING

Fire Hazard

Use a heavy metal vent.

Do not use a plastic vent.

Do not use a metal foil vent.

Failure to follow these instructions can result in death or fire.

WARNING: To reduce the risk of fire, this dryer MUST BE EXHAUSTED OUTDOORS.

IMPORTANT: Observe all governing codes and ordinances.

The dryer exhaust must not be connected into any gas vent, chimney, wall, ceiling or a concealed space of a building.

If using an existing vent system

„Clean lint from the entire length of the system and make sure exhaust hood is not plugged with lint.

„Replace any plastic or metal foil vent with rigid or flexible heavy metal vent.

„Review vent system chart. Modify existing vent system if necessary to achieve the best drying performance.

If this is a new vent system

Vent material

„Use a heavy metal vent. Do not use plastic or metal foil vent.

„4" (10.2 cm) heavy metal exhaust vent and clamps must be used.

4"

10.2 cm

4" (10.2 cm) heavy metal exhaust vent

Vent products can be purchased from your dealer or by calling Maytag Services. For more information, see the “Assistance or Service” section.

Rigid metal vent

„For best drying performance, rigid metal vents are recommended.

„Rigid metal vent is recommended to avoid crushing and kinking.

10

Page 9 Page 11
Page 10
Image 10
Maytag W10057352A manual Venting Requirements
Page 9 Page 11

W10057352A specifications

The Maytag W10057352A is a highly regarded appliance designed to enhance the efficiency and functionality of modern kitchens. This product is primarily recognized as a durable and reliable power source for numerous kitchen tasks, embodying the brand’s commitment to quality and performance.

One of the standout features of the Maytag W10057352A is its robust construction. Built with heavy-duty materials, it is engineered to withstand the rigors of daily use, ensuring longevity and continued performance over time. This appliance is designed for those who value reliability in their kitchen equipment.

The W10057352A incorporates advanced technology that sets it apart in the market. It features a powerful motor that delivers exceptional performance, making it ideal for a variety of tasks from mixing to mashing. The device is equipped with variable speed settings, allowing users to easily adjust the speed based on their specific cooking needs. This level of control enhances user experience, ensuring that they can achieve the desired consistency and texture in their culinary creations.

In terms of ease of use, the Maytag W10057352A is designed with user-friendly controls that simplify operation. Its ergonomic handle ensures a comfortable grip, and the intuitive buttons provide quick access to the various functions. Moreover, the appliance is easy to clean, with many components designed for convenient disassembly and dishwasher-safe features. This aspect is particularly appealing to busy individuals who seek low-maintenance solutions in their kitchen.

Another key characteristic of the W10057352A is its versatility. It is compatible with a range of attachments and accessories, allowing users to customize the appliance according to their cooking requirements. Whether users are whipping, kneading, or blending, the Maytag W10057352A offers flexibility to tackle a myriad of recipes.

Energy efficiency is also an integral part of the design philosophy behind the Maytag W10057352A. The appliance operates efficiently, minimizing energy consumption without compromising performance. This focus on energy efficiency not only benefits users’ utility bills but also aligns with environmentally conscious practices.

Overall, the Maytag W10057352A stands out as a powerful, efficient, and versatile appliance that embodies the brand's dedication to quality. Its robust construction, advanced technology, user-friendly features, and adaptability make it a valuable addition to any kitchen. Whether for a budding home cook or a seasoned chef, the Maytag W10057352A is poised to meet and exceed culinary expectations.
Top Page Image Contents