10.Using pliers, tighten the coupling with an additional two-thirds turn.

NOTE: Do not overtighten. Damage to the coupling can result.

11.Check that the water faucets are on.

12.Check for leaks around “Y” connector, faucet and hoses.

Level Dryer

Check the levelness of the dryer. Check levelness first side to side, then front to back.

If the dryer is not level, prop up the dryer using a wood block. Use a wrench to adjust the legs up or down and check again for levelness.

Complete Installation

1.Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.

2.Check that you have all of your tools.

3.Dispose of/recycle all packaging materials.

4.Check the dryer’s final location. Be sure the vent is not crushed or kinked.

5.Check that the dryer is level. See “Level Dryer.”

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

6.Plug into a grounded 3 prong outlet. Turn on power.

7.Remove any protective film or tape remaining on the dryer.

8.Be sure the water faucets are on.

9.Check for leaks around “Y” connector, faucet and hoses.

10.Read “Dryer Use.”

11.Wipe the dryer drum interior thoroughly with a damp cloth to remove any dust.

12.Set the dryer on a full heat cycle (not an air cycle) for 20 minutes and start the dryer.

If the dryer will not start, check the following:

„Controls are set in a running or “On” position.

„Start button has been pushed firmly.

„Dryer is plugged into a grounded 3 prong outlet.

„Electrical supply is connected.

„Household fuse is intact and tight, or circuit breaker has not tripped.

„Dryer door is closed.

„This dryer automatically runs an installation diagnostic routine at the start of its first cycle.

NOTE: You may notice an odor when the dryer is first heated. This odor is common when the heating element is first used. The odor will go away.

13.When the dryer has been running for 5 minutes, open the dryer door and feel for heat. If you feel heat, cancel cycle and close door. If you do not feel heat, turn off the dryer and check that the gas supply line shutoff valve is open.

„If the gas supply line shutoff valve is closed, open it, then repeat the 5-minute test as outlined above.

„If the gas supply line shutoff valve is open, contact a qualified technician.

14.If you live in a hard water area, use of a water softener is recommended to control the buildup of scale through the water system in the dryer. Over time, the buildup of lime scale may clog different parts of the water system, which will reduce product performance. Excessive scale buildup may lead to the need for certain part replacement or repair.

16

Page 15 Page 17
Page 16
Image 16
Maytag W10057352A manual Level Dryer, Complete Installation, If the dryer will not start, check the following
Page 15 Page 17

W10057352A specifications

The Maytag W10057352A is a highly regarded appliance designed to enhance the efficiency and functionality of modern kitchens. This product is primarily recognized as a durable and reliable power source for numerous kitchen tasks, embodying the brand’s commitment to quality and performance.

One of the standout features of the Maytag W10057352A is its robust construction. Built with heavy-duty materials, it is engineered to withstand the rigors of daily use, ensuring longevity and continued performance over time. This appliance is designed for those who value reliability in their kitchen equipment.

The W10057352A incorporates advanced technology that sets it apart in the market. It features a powerful motor that delivers exceptional performance, making it ideal for a variety of tasks from mixing to mashing. The device is equipped with variable speed settings, allowing users to easily adjust the speed based on their specific cooking needs. This level of control enhances user experience, ensuring that they can achieve the desired consistency and texture in their culinary creations.

In terms of ease of use, the Maytag W10057352A is designed with user-friendly controls that simplify operation. Its ergonomic handle ensures a comfortable grip, and the intuitive buttons provide quick access to the various functions. Moreover, the appliance is easy to clean, with many components designed for convenient disassembly and dishwasher-safe features. This aspect is particularly appealing to busy individuals who seek low-maintenance solutions in their kitchen.

Another key characteristic of the W10057352A is its versatility. It is compatible with a range of attachments and accessories, allowing users to customize the appliance according to their cooking requirements. Whether users are whipping, kneading, or blending, the Maytag W10057352A offers flexibility to tackle a myriad of recipes.

Energy efficiency is also an integral part of the design philosophy behind the Maytag W10057352A. The appliance operates efficiently, minimizing energy consumption without compromising performance. This focus on energy efficiency not only benefits users’ utility bills but also aligns with environmentally conscious practices.

Overall, the Maytag W10057352A stands out as a powerful, efficient, and versatile appliance that embodies the brand's dedication to quality. Its robust construction, advanced technology, user-friendly features, and adaptability make it a valuable addition to any kitchen. Whether for a budding home cook or a seasoned chef, the Maytag W10057352A is poised to meet and exceed culinary expectations.
Top Page Image Contents