Special provisions for mobile home installations

The exhaust vent must be securely fastened to a noncombustible portion of the mobile home structure and must not terminate beneath the mobile home. Terminate the exhaust vent outside.

Determine vent path

„Select the route that will provide the straightest and most direct path outdoors.

„Plan the installation to use the fewest number of elbows and turns.

„When using elbows or making turns, allow as much room as possible.

„Bend vent gradually to avoid kinking.

„Use the fewest 90° turns possible.

Determine vent length and elbows needed for best drying performance

„Use the following Vent system chart to determine type of vent material and hood combinations acceptable to use.

NOTE: Do not use vent runs longer than those specified in the Vent system chart. Exhaust systems longer than those specified will:

„Shorten the life of the dryer.

„Reduce performance, resulting in longer drying times and increased energy usage.

The Vent system chart provides venting requirements that will help to achieve the best drying performance.

Vent system chart

NOTE: Side and bottom exhaust installations have a 90º turn inside the dryer. To determine maximum exhaust length, add one 90º turn to the chart.

Number of 90º

Type of vent

Box or louvered

Angled hoods

turns or elbows

 

hoods

 

 

 

 

 

0

Rigid metal

64 ft (20 m)

58 ft (17.7 m)

 

Flexible metal

36 ft (11 m)

28 ft (8.5 m)

 

 

 

 

1

Rigid metal

54 ft (16.5 m)

48 ft (14.6 m)

 

Flexible metal

31 ft (9.4 m)

23 ft (7 m)

 

 

 

 

2

Rigid metal

44 ft (13.4 m)

38 ft (11.6 m)

 

Flexible metal

27 ft (8.2 m)

19 ft (5.8 m)

 

 

 

 

3

Rigid metal

35 ft (10.7 m)

29 ft (8.8 m)

 

Flexible metal

25 ft (7.6 m)

17 ft (5.2 m)

 

 

 

 

4

Rigid metal

27 ft (8.2 m)

21 ft (6.4 m)

 

Flexible metal

23 ft (7 m)

15 ft (4.6 m)

Install Vent System

1.Install exhaust hood. Use caulking compound to seal exterior wall opening around exhaust hood.

2.Connect vent to exhaust hood. Vent must fit inside exhaust hood. Secure vent to exhaust hood with 4" (10.2 cm) clamp.

3.Run vent to dryer location. Use the straightest path possible. See “Determine vent path” in “Plan Vent System.” Avoid 90º turns. Use clamps to seal all joints. Do not use duct tape, screws or other fastening devices that extend into the interior of the vent to secure vent.

13

Page 12 Page 14
Page 13
Image 13
Maytag W10057352A manual Install Vent System, Determine vent path, Vent system chart
Page 12 Page 14

W10057352A specifications

The Maytag W10057352A is a highly regarded appliance designed to enhance the efficiency and functionality of modern kitchens. This product is primarily recognized as a durable and reliable power source for numerous kitchen tasks, embodying the brand’s commitment to quality and performance.

One of the standout features of the Maytag W10057352A is its robust construction. Built with heavy-duty materials, it is engineered to withstand the rigors of daily use, ensuring longevity and continued performance over time. This appliance is designed for those who value reliability in their kitchen equipment.

The W10057352A incorporates advanced technology that sets it apart in the market. It features a powerful motor that delivers exceptional performance, making it ideal for a variety of tasks from mixing to mashing. The device is equipped with variable speed settings, allowing users to easily adjust the speed based on their specific cooking needs. This level of control enhances user experience, ensuring that they can achieve the desired consistency and texture in their culinary creations.

In terms of ease of use, the Maytag W10057352A is designed with user-friendly controls that simplify operation. Its ergonomic handle ensures a comfortable grip, and the intuitive buttons provide quick access to the various functions. Moreover, the appliance is easy to clean, with many components designed for convenient disassembly and dishwasher-safe features. This aspect is particularly appealing to busy individuals who seek low-maintenance solutions in their kitchen.

Another key characteristic of the W10057352A is its versatility. It is compatible with a range of attachments and accessories, allowing users to customize the appliance according to their cooking requirements. Whether users are whipping, kneading, or blending, the Maytag W10057352A offers flexibility to tackle a myriad of recipes.

Energy efficiency is also an integral part of the design philosophy behind the Maytag W10057352A. The appliance operates efficiently, minimizing energy consumption without compromising performance. This focus on energy efficiency not only benefits users’ utility bills but also aligns with environmentally conscious practices.

Overall, the Maytag W10057352A stands out as a powerful, efficient, and versatile appliance that embodies the brand's dedication to quality. Its robust construction, advanced technology, user-friendly features, and adaptability make it a valuable addition to any kitchen. Whether for a budding home cook or a seasoned chef, the Maytag W10057352A is poised to meet and exceed culinary expectations.
Top Page Image Contents