INSTALLATION INSTRUCTIONS
Toolsand Parts
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
Options
Pedestal
■
■#2 Phillips screwdriver
■Adjustable wrench that opens to 1" (2.5 cm) or
■Wire stripper (direct wire installations)
■Level
■Vent clamps
■Caulking gun and compound (for installing new exhaust vent)
■Tin snips (new vent installations)
■¼" nut driver (recommended)
■Tape measure
Are you placing the dryer on a pedestal? You have the option of purchasing a pedestal separately for this dryer. You may select a 15.5" (39.4 cm) pedestal. This pedestal will add to the total height of the dryer for a total height of approximately 53.5" (135.9 cm).
For a garage installation, you will need to place the pedestal at least 3.5" (8.9 cm) above the floor.
Parts supplied
Remove parts packages from dryer drum. Check that all parts are included.
4 Leveling legs
NOTE: Do not use leveling legs if installing the dryer on a pedestal.
Parts needed
Check local codes. Check existing electrical supply and venting. See “Electrical Requirements” and “Venting Requirements” before purchasing parts.
■For
37"
(93.98 cm)
Mobile home installations require metal exhaust system hardware available for purchase from the dealer from whom you purchased your dryer. For further information, please refer to the “Assistance or Service” section of this manual.
Optional pedestal
To order, call the dealer from whom you purchased your dryer or refer to the “Assistance or Service” section of this manual.
Pedestal | Color | Part Number |
Height |
|
|
|
|
|
15.5" (39.4 cm) | White | WHP1500SQ |
|
|
|
15.5" (39.4 cm) | Black | WHP1500SB |
Stack Kit
Are you planning to stack your washer and dryer? To do so, you will need to purchase a Stack Kit.
To order, call the dealer from whom you purchased your dryer or refer to the “Assistance or Service” section of this manual. Ask for Part Number 8541503.
4
