Maytag W10112937A manual Reverse Door Swing, Remove the door assembly, Reverse hinge

Reverse Door Swing

You can change your door swing from a right-side opening to a left-side opening, if desired.

1.Place a towel or soft cloth on top of the dryer or work space to protect the surface.

Remove the door assembly

1.Remove the 4 screws that hold the door hinge on the front panel of the dryer.

5.Rotate outer door 180°.

180˚

A

B

A. Dryer front panel

B. Door assembly

2.Lay the door assembly on a flat, protected surface with the inside (inner door assembly) facing up.

3.Remove the 6 Phillips head screws to release the outer door assembly from the inner door assembly, as indicated below. See illustration. It is important that you remove only the 6 indicated screws.

Reverse hinge

1.Use a small flat-blade screwdriver to remove 2 plug strips from the inner door. Slide the head of the screwdriver under the plugs, being certain not to scratch the inner door surface. Lift up.

4.Lift the inner door assembly off the outer door assembly.

20