Install Vent System, Install Leveling Legs

Determine vent path

■Select the route that will provide the straightest and most direct path outdoors.

■Plan the installation to use the fewest number of elbows and turns.

■When using elbows or making turns, allow as much room as possible.

■Bend vent gradually to avoid kinking.

■Use the fewest 90° turns possible.

Determine vent length and elbows needed for best drying performance

■Use the following Vent system chart to determine type of vent material and hood combinations acceptable to use.

NOTE: Do not use vent runs longer than those specified in the Vent system chart. Exhaust systems longer than those specified will:

■Shorten the life of the dryer.

■Reduce performance, resulting in longer drying times and increased energy usage.

The Vent system chart provides venting requirements that will help to achieve the best drying performance.

Vent system chart

NOTE: Performance of rear exhaust to either side of the dryer is equivalent to adding one elbow. To determine maximum exhaust length, add one elbow to the chart.

Number of	Type of	Box or	Angled
90º turns	vent	Louvered	hoods
or elbows		hoods

0	Rigid metal	64 ft (20 m)	58 ft (17.7 m)
	Flexible metal	36 ft (11 m)	28 ft (8.5 m)

1	Rigid metal	54 ft (16.5 m)	48 ft (14.6 m)
	Flexible metal	31 ft (9.4 m)	23 ft (7 m)

2	Rigid metal	44 ft (13.4 m)	38 ft (11.6 m)
	Flexible metal	27 ft (8.2 m)	19 ft (5.8 m)

3	Rigid metal	35 ft (10.7 m)	29 ft (8.8 m)
	Flexible metal	25 ft (7.6 m)	17 ft (5.2 m)

4	Rigid metal	27 ft (8.2 m)	21 ft (6.4 m)
	Flexible metal	23 ft (7 m)	15 ft (4.6 m)

Install Vent System

1.Install exhaust hood. Use caulking compound to seal exterior wall opening around exhaust hood.

2.Connect vent to exhaust hood. Vent must fit inside exhaust hood. Secure vent to exhaust hood with 4" (10.2 cm) clamp.

3.Run vent to dryer location. Use the straightest path possible. See “Determine vent path” in “Plan Vent System.” Avoid 90º turns. Use clamps to seal all joints. Do not use duct tape, screws or other fastening devices that extend into the interior of the vent to secure vent.

Install Leveling Legs

WARNING

Excessive Weight Hazard

Use two or more people to move and install dryer.

Failure to do so can result in back or other injury.

1.To protect the floor, use a large flat piece of cardboard from the dryer carton. Place cardboard under the entire back edge of the dryer.

2.Firmly grasp the body of the dryer (not the top or console panel). Gently lay the dryer on the cardboard. See illustration.

3.Examine the leveling legs. Find the diamond marking.

4.Screw the legs into the leg holes by hand. Use a wrench to finish turning the legs until the diamond marking is no longer visible.

5.Place a carton corner post from dryer packaging under each of the 2 dryer back corners. Stand the dryer up. Slide the dryer on the corner posts until it is close to its final location. Leave enough room to connect the exhaust vent or gas line.

For mobile home use

Gas dryers must be securely fastened to the floor.

Mobile home installations require a Mobile Home Installation Kit. See “Tools and Parts” section for information on ordering.

W10150661A, W10150660A specifications

The Maytag W10150660A and W10150661A are two exceptional models designed to enhance the user experience in home laundry. They showcase advanced features and sophisticated technologies that cater to the evolving needs of modern households.

One of the standout characteristics of both models is their robust build quality, reflecting Maytag's commitment to durability and reliability. Made from high-grade materials, these units offer a long lifespan, ensuring they can handle even the toughest laundry loads. This is especially important for larger families or those who regularly do extensive laundry.

The W10150660A and W10150661A feature innovative washing options that allow users to customize their laundry experience. With multiple wash cycles, including options for heavy-duty, delicate, and quick washes, the models can adeptly manage any type of fabric, providing the right care for every garment. This versatility makes them ideal for households with diverse laundry needs.

Energy efficiency is another hallmark of these Maytag models. They come equipped with advanced technologies designed to minimize water and energy consumption without compromising cleaning performance. This not only helps in reducing utility bills but also aligns with environmentally friendly practices, making them a responsible choice for eco-conscious consumers.

Both the W10150660A and W10150661A utilize a powerful agitator system that ensures thorough cleaning by effectively removing dirt and stains from fabrics. The robust motor delivers optimal torque, allowing the units to tackle even the most stubborn grime with ease.

Additionally, these models are designed with user convenience in mind. The intuitive control panels are straightforward and easy to navigate, enabling users to select their desired settings with minimal effort. Features such as time delay options and automatic dispensers further streamline the laundry process, offering additional flexibility to accommodate busy lifestyles.

The spacious drum capacity provided in both models allows for handling larger loads, reducing the number of cycles needed for laundry. This not only saves time but also makes laundry days more efficient.

In summary, the Maytag W10150660A and W10150661A combine durability, versatility, energy efficiency, and user-friendly features. These models stand out as reliable allies in tackling laundry challenges, making them an excellent addition to any modern home.

Maytag W10150661A, W10150660A Install Vent System, Install Leveling Legs, Determine vent path

Models: W10150661A W10150660A