■³⁄₈" approved aluminum or copper tubing is acceptable for lengths under 20 ft (6.1 m) if local codes and gas supplier permit.

■If you are using Natural gas, do not use copper tubing.

■³⁄₈" flare x ³⁄₈" NPT adapter fitting between dryer pipe and ³⁄₈" approved tubing.

■Lengths over 20 ft (6.1 m) should use larger tubing and a different size adapter fitting.

■If your dryer has been converted to use LP gas, ³⁄₈" LP compatible copper tubing can be used. If the total length of the supply line is more than 20 ft (6.1 m), use larger pipe.

NOTE: Pipe-joint compounds that resist the action of LP gas must be used. Do not use TEFLON®† tape.

■Must include a shutoff valve:

In the U.S.A.:

An individual manual shutoff valve must be installed within six (6) feet (1.8 m) of the dryer in accordance with the National Fuel Gas Code, ANSI Z223.1.

In Canada:

An individual manual shutoff valve must be installed in accordance with the B149.1, Natural Gas and Propane Installation Code. It is recommended that an individual manual shutoff valve be installed within six (6) feet (1.8 m) of the dryer.

The location should be easy to reach for opening and closing.

A C E

BD

A. ³⁄₈" flexible gas connector

B. ³⁄₈" pipe to flare adapter fitting

C. ¹⁄₈" NPT minimum plugged tapping

D. ½" NPT gas supply line

E. Gas shutoff valve

Gas supply connection requirements

■Use an elbow and a ³⁄₈" flare x ³⁄₈" NPT adapter fitting between the flexible gas connector and the dryer gas pipe, as needed to avoid kinking.

■Use only pipe-joint compound. Do not use TEFLON®† tape.

■This dryer must be connected to the gas supply line with a listed flexible gas connector that complies with the standard for connectors for gas appliances, ANSI Z21.24 or CSA 6.10.

†®TEFLON is a registered trademark of E.I. Du Pont De Nemours and Company.

Burner Input Requirements:

Elevations above 10,000 ft (3,048 m):

■When installed above 10,000 ft (3,048 m) a 4% reduction of the burner Btu rating shown on the model/serial number plate is required for each 1,000 ft (305 m) increase in elevation.

Gas Supply Pressure Testing

■The dryer must be disconnected from the gas supply piping system during pressure testing at pressures greater than ½ psi.

Dryer Gas Pipe

■The gas pipe that comes out through the rear of your dryer has a ³⁄₈" male pipe thread.

2"

(5.1 cm)

A

³⁄₄"

 

(1.9 cm)

A. ³⁄₈" NPT dryer pipe

Venting Requirements

WARNING

Fire Hazard

Use a heavy metal vent.

Do not use a plastic vent.

Do not use a metal foil vent.

Failure to follow these instructions can result in death or fire.

WARNING: To reduce the risk of fire, this dryer MUST BE EXHAUSTED OUTDOORS.

IMPORTANT: Observe all governing codes and ordinances.

The dryer exhaust must not be connected into any gas vent, chimney, wall, ceiling or a concealed space of a building.

8

Page 7 Page 9
Page 8
Image 8
Maytag W10150660A Venting Requirements, Gas supply connection requirements, Burner Input Requirements, Dryer Gas Pipe
Page 7 Page 9

W10150661A, W10150660A specifications

The Maytag W10150660A and W10150661A are two exceptional models designed to enhance the user experience in home laundry. They showcase advanced features and sophisticated technologies that cater to the evolving needs of modern households.

One of the standout characteristics of both models is their robust build quality, reflecting Maytag's commitment to durability and reliability. Made from high-grade materials, these units offer a long lifespan, ensuring they can handle even the toughest laundry loads. This is especially important for larger families or those who regularly do extensive laundry.

The W10150660A and W10150661A feature innovative washing options that allow users to customize their laundry experience. With multiple wash cycles, including options for heavy-duty, delicate, and quick washes, the models can adeptly manage any type of fabric, providing the right care for every garment. This versatility makes them ideal for households with diverse laundry needs.

Energy efficiency is another hallmark of these Maytag models. They come equipped with advanced technologies designed to minimize water and energy consumption without compromising cleaning performance. This not only helps in reducing utility bills but also aligns with environmentally friendly practices, making them a responsible choice for eco-conscious consumers.

Both the W10150660A and W10150661A utilize a powerful agitator system that ensures thorough cleaning by effectively removing dirt and stains from fabrics. The robust motor delivers optimal torque, allowing the units to tackle even the most stubborn grime with ease.

Additionally, these models are designed with user convenience in mind. The intuitive control panels are straightforward and easy to navigate, enabling users to select their desired settings with minimal effort. Features such as time delay options and automatic dispensers further streamline the laundry process, offering additional flexibility to accommodate busy lifestyles.

The spacious drum capacity provided in both models allows for handling larger loads, reducing the number of cycles needed for laundry. This not only saves time but also makes laundry days more efficient.

In summary, the Maytag W10150660A and W10150661A combine durability, versatility, energy efficiency, and user-friendly features. These models stand out as reliable allies in tackling laundry challenges, making them an excellent addition to any modern home.
Top Page Image Contents