1, Drape the power cord over the washer top.

2.Secure the drain hose to the laundry tub leg or standpipe with the beaded strap provided. (See illustrations A and B.)

1.Check the electrical requirements. Be sure that you have the correct electrical supply and

the recommended grounding method. See "Electrical Requirements."

2.Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.

3.Check that you have all of your tools.

4.Dispose of/recycle all packaging materials.

5.Check that the water faucets are on.

6.Check for leaks around faucets and inlet hoses.

ABC

If the washer faucets and the drain standpipe are recessed (see illustration C), put the

hooked end of the drain hose in the standpipe. Tightly wrap the beaded strap around the water inlet hoses and the drain hose.

I)o not force excess drain hose into the standpipe.

Properly leveling your washer avoids excessive noise and vibration.

1.Check the levelness of the washer by placing a level on the top edge of the washei; first side to side, then front to back.

If the washer is against a wall, move the washer out slightly before tipping back. If the washer is not [eve[, first prop the front with a wood block and adjust the feet as necessary; then prop the back and adjust feet as necessary. Repeat this step until washer is [eve[.

2.Make sure all four feet are stable and resting on the floor. Then check that the appliance is perfectly [eve[ (use a [eve[).

3.After the washer is [eve[, use a 1 7 mm open-end wrench to turn the nuts on the feet tightly against the washer cabinet.

IMPORTANT: All four feet must be tightened. If the nuts are not tight against the washer cabinet, the washer may vibrate.

The washer should not move front to back, side to side, or diagonally when pushed on its top edges.

5.Slide the washer to its final location.

6.Confirm the levelness of the washer.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Z'I

 

 

 

Do not

use an

adapter.

 

Do not

use an

extension cord.

 

Failure to follow these instructions can result in death, fire, or electrical shock.

7.Plug into a grounded 3 prong outlet.

8.Read "Washer Use."

9.To test and clean your washer, make sure there are no clothes in the washer and add one AFFRESH r,, tablet to the washer drum. Select POWER/CANCEl_, the Clean Washer cycle,

and then select START/PAUSE This cycle will take approximately 65 minutes to complete. Allow the washer to complete the entire Clean Washer Cycle without interruption.

Page 10 Page 12
Page 11
Image 11
Maytag W10176966C manual Do not remove ground prong, Do not Use an, Adapter
Page 10 Page 12

W10176966C specifications

The Maytag W10176966C is a highly efficient and versatile appliance designed to enhance the functionality of your home. As part of Maytag’s commitment to reliability and performance, this model stands out for its innovative features, cutting-edge technologies, and robust design.

One of the main features of the Maytag W10176966C is its durable construction. Built with high-quality materials, this appliance is designed to withstand the rigors of daily use while maintaining its performance over time. The stainless steel finish not only gives it a sleek and modern look, but it also resists smudges and fingerprints, making it easy to clean and maintain.

The W10176966C is equipped with advanced features that contribute to its efficiency. For instance, it has a powerful motor that ensures optimal cleaning performance, with various speeds to tackle different tasks. This allows users to customize their cleaning experience based on the type of load they are handling, whether it be delicate fabrics or heavily soiled items.

Energy efficiency is also a key characteristic of the Maytag W10176966C. This model is designed to consume less water and energy without compromising cleaning power. It is compliant with ENERGY STAR standards, which means it meets strict energy efficiency guidelines set by the EPA, helping homeowners save on utility bills while also being environmentally friendly.

Additionally, the appliance incorporates innovative technologies such as load sensing, which automatically adjusts the cycle duration and resources based on the size and soil level of each load. This results in a more efficient wash that ensures optimal resource use, reducing waste and improving overall performance.

Users will also appreciate the intuitive control panel, which makes it easy to select settings and monitor progress. The variety of cycle options ensures that there is a suitable choice for every cleaning need, and the delayed start feature offers added convenience, allowing users to schedule washing times according to their preference.

Overall, the Maytag W10176966C combines durability, efficiency, and advanced technologies to provide a superior cleaning experience. With its focus on reliability and user-friendly features, it is an excellent addition to any home, reflecting Maytag’s long-standing tradition of quality and performance. This model is ideal for families and individuals seeking a dependable partner for their laundry needs.
Top Page Image Contents