Maytag W10176966C Cleaning the door seal, Wear rubber gloves when cleaning for prolonged periods

Sorting

•Separate heavily soiled items from lightly soiled ones, even if they would normally be washed together. Separate lint-givers (towels, chenille) from lint-takers (corduroy, synthetics, permanent press). When possible, turn lint-givers inside out.

•Separate dark colors from light colors, colorfast items from non colorfast items.

•Sort by fabric and construction (sturdy cottons, knits, delicate items).

Unloading

•Remove clothes from washer after the cycle is completed. Metal objects such as zippers, snaps, and buckles may rust if [eft in the washer basket for a long time.

Loading		suggestions
Heavy Work Clothes
4	jeans		2	sweatpants
4	work	pants	2	sweatshirts
4	work	shirts

Towels

•When unloading garments, occasionally check under the gray colored seal at the front of the tub for small items.

1 0	bath	towels		14	washcloths
10	hand		towels
Mixed		Load
3	sheets		(1 king, 2 twin)	9	T-shirts
4	pillowcases			9	shorts
3	shirts			10	handkerchiefs
3	blouses

WASHER CARE

Cleaning the door seal

1.Open the washer door and remove any clothing or items from the washer.

2.Inspect the gray colored seal between the door opening and the basket for stained areas. Pull back the seal to inspect areas under the seal. Remove any foreign objects.

A. Seal

d)Wipe down area thoroughly with a dry cloth and let the washer interior air dry with door open.

IMPORTANT:

•Wear rubber gloves when cleaning for prolonged periods.

•Refer to the bleach manufacturer's instructions for proper use.

Washer Maintenance Procedure

This washer has a special cycle that uses higher water volumes and steam, in combination

with AFFRESH r_* washer cleaner or liquid chlorine bleach to thoroughly clean the inside of the washer.

NOTES:

•Read these instructions completely before beginning the cleaning process.

If necessary, the cleaning cycle may be interrupted by pressing the START/PAUSE button.

However; this will not immediately stop the cycle. The machine will display "int"

(interrupt) and continue with several rinse and drain steps to ensure that all remaining bleach is rinsed from the washer.

3.If stained areas are found, wipe down these areas of the seal, using the procedure that follows.

a)Mix a dilute solution, using 3/4 cup (177 ml.) of liquid chlorine bleach, and 1 gal. (3.8 I.) of warm tap water.

b)Wipe the seal area with the dilute solution, using a damp cloth.

c)I_et stand 5 minutes.