The Anti-Tip Bracket

The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without the anti- tip bracket fastened down properly.

Anti-Tip Bracket

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Connect anti-tip bracket to rear range foot.

Reconnect the anti-tip bracket, if the range is moved.

See the installation instructions for details.

Failure to follow these instructions can result in death or serious burns to children and adults.

Making sure the anti-tip bracket is installed:

• Slide range forward.

• Look for the anti-tip bracket securely attached to floor.

• Slide range back so rear range foot is under anti-tip bracket. Range Foot

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electrical shock, injury to persons, or damage when using the range, follow basic precautions, including the following:

■WARNING: TO REDUCE THE RISK OF TIPPING OF THE RANGE, THE RANGE MUST BE SECURED BY PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET SECURELY ATTACHED TO FLOOR, AND SLIDE RANGE BACK SO REAR RANGE FOOT IS UNDER ANTI-TIP BRACKET.

■WARNING: NEVER use this appliance as a space heater to heat or warm the room. Doing so may result in carbon monoxide poisoning and overheating of the oven.

■WARNING: NEVER cover any slots, holes or passages in the oven bottom or cover an entire rack with materials such as aluminum foil. Doing so blocks air flow through the oven and may cause carbon monoxide poisoning. Aluminum foil linings may also trap heat, causing a fire hazard.

■CAUTION: Do not store items of interest to children in cabinets above a range or on the backguard of a range – children climbing on the range to reach items could be seriously injured.

■Proper Installation – The range, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70. Be sure the range is properly installed and grounded by a qualified technician.

■This range is equipped with a three-prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded receptacle. Do not cut or remove the grounding prong from this plug.

■Disconnect power before servicing.

■Injuries may result from the misuse of appliance doors or drawers such as stepping, leaning, or sitting on the doors or drawers.

■Maintenance – Keep range area clear and free from combustible materials, gasoline, and other flammable vapors and liquids.

■Storage in or on the Range – Flammable materials should not be stored in an oven or near surface units.

■Top burner flame size should be adjusted so it does not extend beyond the edge of the cooking utensil.

For self-cleaning ranges –

■Before Self-Cleaning the Oven – Remove broiler pan and other utensils. Wipe off all excessive spillage before initiating the cleaning cycle.

SAVE THESE INSTRUCTIONS

3

Page 2 Page 4
Page 3
Image 3
Maytag W10234650A warranty Important Safety Instructions, Anti-Tip Bracket
Page 2 Page 4

W10234650A specifications

The Maytag W10234650A is a highly sought-after appliance part, primarily known as a dishwasher upper spray arm. This essential component plays a critical role in ensuring the efficient operation of a dishwasher, delivering powerful water jets that rinse dishes, pots, and pans thoroughly for optimal cleaning performance.

One of the standout features of the Maytag W10234650A is its durability. Constructed with high-quality materials, this upper spray arm is designed to withstand the rigors of regular use in a busy kitchen environment. Its robust design helps prevent wear and tear, allowing it to function effectively over an extended period.

The technology behind the W10234650A spray arm focuses on maximizing water distribution. With multiple strategically positioned spray nozzles, this component ensures that water reaches every corner of the dishwasher. This design promotes a more consistent and thorough cleaning experience, minimizing the chances of food residues being left behind on dishes.

Another important characteristic of the Maytag W10234650A is its compatibility with various models of Maytag and some Whirlpool dishwashers. This versatility makes it a practical choice for homeowners looking to maintain the longevity of their appliances without having to purchase a new dishwasher. When replacing an old or damaged spray arm, users can rest assured that the W10234650A will integrate seamlessly, restoring the dishwasher's performance.

Installation of the Maytag W10234650A is straightforward, allowing users to easily replace the part without the need for professional assistance. This user-friendly aspect empowers homeowners to take charge of their appliance maintenance, ensuring their dishwasher operates efficiently.

In summary, the Maytag W10234650A upper spray arm stands out for its durable build, advanced water distribution technology, and compatibility with various dishwasher models. It serves as an excellent solution for improving dishwasher performance, making it an invaluable component for anyone seeking to enhance their dishwashing experience. With its combination of quality and efficiency, the W10234650A is a reliable choice for maintaining the effectiveness of Maytag dishwashers over time.
Top Page Image Contents