Maytag W10282553A Move dishwasher close to cabinet opening, Check water and drain hose position

2 Move dishwasher close to cabinet opening

5 Closes too quickly— Decrease spring tension

Water line

Drain hose

Cable

Direct Wire

Only

IMPORTANT: Double-check correct placement of utilities. Grasp the sides of the dishwasher at the edges of the door panel. Tilt dishwasher backward on wheels and move dishwasher close to cabinet opening.

NOTE: Do not push on the front of the panel or on the console– they may dent.

Helpful Tip: Temporarily tape utilities to the floor in the locations shown to keep them from moving when dishwasher is moved into the cabinet opening.

3 Check water and drain hose position

Check that water line is on the left side of opening

and drain hose is near the center of the cabinet opening.

4 Open and close door

With another person holding the dishwasher to keep it from tipping, open and close the door a few times. If the door closes or falls open under its own weight, the door tension will need to be adjusted.

14

If the door closes too quickly, decrease the spring tension by moving the spring end toward the front of the dishwasher.

NOTE: Springs should be in the same notches on left and right sides.

6 Door falls open— Increase spring tension

If the door falls open, increase the spring tension by moving the spring end toward the back of the dishwasher.

NOTE: Springs should be in the same notches on left and right sides.

7 Move dishwasher into cabinet opening

Insulation

blanket