2 Power Supply Cord–Prepare hole
Wood | Metal |
cabinet | cabinet |
Wood cabinet: Sand the hole until smooth.
Metal cabinet: Cover hole with grommet (Part Number 302797) included with power supply cord kit.
Option B, Direct Wire:
Helpful Tip: Wiring the dishwasher will be easier if you route the cable into the cabinet opening from the
3 Direct Wire–Route cable
(15 |
| 6 |
. | ” | |
| 2 | cm) |
|
|
Route cable from power supply through cabinet hole (cable must extend to the right front side of cabinet opening).
Tape cable to the floor in area shown. This will keep cable from moving when dishwasher is moved into cabinet opening.
Prepare and Route Water Line
Helpful Tip: Routing the water line through the left side of cabinet opening will make water connection easier.
1 Direct Wire — Drill hole
Optional location
PreferrePr e dlocationlocation
(1.9 cm)
Drill a ³⁄₄" (1.9 cm) hole in
1 Drill hole
PreferredPr ferredloloccations
¹⁄₂"
(1.3 cm)
OptionalOptionallocationslocations
2 Direct Wire–Prepare hole
Wood | Metal |
cabinet | cabinet |
Wood cabinet: Sand the hole until smooth.
Metal cabinet: Cover hole with grommet (Part Number 302797 not included)
Drill a ¹⁄₂" (1.3 cm) hole in the cabinet side or rear.
2 Measure water supply line |
Hot water line |
Measure overall length of copper tubing or flexible braided water supply line. Attach to the hot water line using a connection configuration that is in compliance with local codes and ordinances. The water line to the dishwasher should have a manual shutoff valve.
7