HOW TO MOVE THE UNIT
CAUTION
• Do not move the unit while someone is seated on it.
Failure to do so may cause the unit to tip over, which may lead to damage or injury.
Move it slowly
Wheels | Hold |
| |
| the legrest. |
Using the wheels to move the unit
•Grasp the legrest to move the unit when using the wheels.
•It is easier to move the unit with the massage heads retracted and the backrest in the upright position.
*Place a mat or cloth on the floor and move the unit slowly to prevent floor damage.
Lifting the Unit
•Move the chair by having one person hold the legrest and another person use the handles on the back.
* Please hold the handles and legrest securely to avoid dropping the unit as it may damage your floor.
POWERING UP THE UNIT
1
1. Plug the power plug into an electrical outlet.
2. Verify that the lock switch key is turned to the “open” position.
• If in “lock” position, turn the lock switch key to “open”.
3. Slide the power switch to the “on” position.
2 3
ATTACHING THE BACK CUSHION, PILLOW AND REAR LEG COVER
1. Attach the back cushion using the | 3. Attach the rear leg cover. | |
zipper. |
| • Place cover against |
|
| chair approx. 4 in. |
| 4" (10cm) | (10 cm) above pipe |
| section. | |
2. Attach the pillow using the fasteners.
* Do not step on the attached rear leg cover.
8
