Panasonic EP1273 Using Pre-Programsand Quick Massage, Press the OFF/ON button, 1 2

USING PRE-PROGRAMS AND QUICK MASSAGE

1

2

5

4

1. Press the OFF/ON button.

• The OFF/ON indicator will come on.

Press • You can now select one of the pre-programs or one of the manual settings.

2.Select the pre-program you want.

•Please press one of the flashing buttons.

•For a general explanation of pre-program characteristics, please refer to the bottom of this page.

•For an outline of each pre-program, please refer to the information on page 18.

•If you press another Pre-Program button during your selected pre- program massage, the massage will switch to the newly selected pre-program.

The Selected Program will Start

•It is possible to change the pre-program selected or to change to manual operation mid-way through a massage.

•In pre-programs, the leg massage begins at the same time.

It is possible to stop or change the intensity of the leg massage during the program. (See Page 17)

3.Sit as far back in the seat as possible with your head on the pillow.

Head rests	• Pressing a Pre-Program button
on pillow.	automatically moves the backrest and
	legrest into massage position.
	• If the massage lounger is reclined
	further than this angle then it will not
	automatically recline.

•Do not place leg between armrest and legrest.

Doing so may result in pinching of leg when legrest rises.

About the Time Indicator

Time Remaining	• Displays remaining massage time via flashing
Approx. 15 min.	LED.
Approx. 9 min.	• Starts counting down from 15 minutes in
	increments of approximately 3 minutes.
Approx. 3 min.
	• Flashing speeds up one minute before end of
	massage.

11