CLEANING AND MAINTENANCE
LEATHER COVERING ON THE PILLOW, THE BACK CUSHION AND THE UNIT
•Wipe these areas with a soft, dry cloth.
(Do NOT use cloths containing any kind of chemical, etc.)
•If the leather is particularly dirty, dampen with liquid soap and brush the surface. Wipe with a cloth dampened with water. Allow to dry naturally.
(Do NOT use a hair dryer to try to dry the surfaces more quickly.)
•Do not allow these areas to come in contact with plastic for extended periods of time as this may lead to discoloration.
•Please do NOT use thinners, benzine or alcohol.
Water
Mild Detergent
PIPE AND PLASTIC AREAS
zWipe the unit with a cloth that has been soaked in a mild detergent and then thoroughly wrung
out.
Mild Detergent
x Next wipe the unit with a cloth that has been moistened with just water and thoroughly wrung out.
* Make sure you thoroughly wring out the cloth
first when cleaning the controller.
cAllow the unit to dry naturally.
Water
• Please do NOT use thinners, benzine or alcohol.
Thinners | Benzine | Alcohol |
COATED FABRIC ON THE BACK CUSHION
zWipe the seat fabric with a cloth that has been soaked in a mild detergent solution and then thoroughly wrung out.
xUse a brush to apply a mild detergent to areas where the coated fabric has become particularly soiled. Be careful not to brush the fabric too much as this may damage it.
cNext wipe the fabric with a cloth that has moistened with just water and then thoroughly wrung out.
v Allow the fabric to dry naturally.
• Please do NOT use thinners, benzine or alcohol. | Water |
|
CAUTION
•Always unplug the unit before cleaning it. Never touch a power plug with wet hands. Failure to follow these instructions may lead to electrocution or burns.
21