Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.25 cm) of space on each side and at the top. Allow for 1"

(2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When installing your refrigerator next to a fixed wall, leave a 2" (5.08 cm) minimum space on each side (depending on your model) to allow the doors to swing open.

1/2" (1.25 cm)

2" (5.08 cm)

NOTES:

It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install in a location where the temperature will fall below 55°F (13°C).

Normal minimum cabinet cut-out width required for product installation is 36" (91.44 cm). However, if the product is placed against an extended wall and the ability to remove the crisper pans is desired, an additional 18" (45.72 cm) of cabinet width is required, so a total cabinet opening width of 54" (137.16 cm) is recommended.

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting. See “Using the Controls.”

Water Supply Requirements

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

TOOLS NEEDED:

Flat-blade screwdriver

¹⁄₄" Nut driver

⁷⁄₁₆" and ¹⁄₂" Open-end or two

¹⁄₄" Drill bit

 

adjustable wrenches

Cordless drill

 

 

NOTE: Your refrigerator dealer has a kit available with a ¹⁄₄"

(6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing-type or ³⁄₁₆"

(4.76 mm) saddle valve which reduces water flow and clogs more easily.

IMPORTANT:

All installations must meet local plumbing code requirements.

Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.

3

Page 3
Image 3
Maytag W10321475A Location Requirements, Electrical Requirements, Water Supply Requirements, Recommended Grounding Method

W10321475A specifications

The Maytag W10321475A is a highly efficient and versatile refrigerator designed to meet the needs of modern households, offering a perfect balance of style, durability, and advanced features. This appliance is known for its elegant design and adaptability, making it a reliable addition to any kitchen.

One of the standout features of the Maytag W10321475A is its spacious interior, which provides ample storage for all your groceries. The refrigerator is equipped with adjustable shelves that can be customized to fit items of various sizes, allowing for maximum flexibility. Whether you need to store large party platters or tall bottles, this refrigerator can accommodate your needs with ease.

Energy efficiency is a crucial aspect of the Maytag W10321475A. It is designed with Energy Star certification, which means it meets strict energy efficiency guidelines. This not only helps reduce electricity bills but also minimizes your environmental footprint, making it a smart choice for eco-conscious consumers.

The cooling technology employed in the Maytag W10321475A ensures that food stays fresh for longer periods. The Precision Cooling system monitors the temperature and humidity levels to provide a stable environment for your food items. This feature is particularly important for maintaining the quality of perishable goods and preventing spoilage.

Additionally, this refrigerator features a built-in ice maker, providing a constant supply of ice for your beverages. The easy access to ice, combined with a water dispenser, enhances the overall convenience of the appliance. You can enjoy cold drinks without the hassle of filling ice trays manually.

Another notable characteristic of the Maytag W10321475A is its robust build quality. Constructed with stainless steel, the refrigerator not only looks sleek but is also resistant to fingerprints and smudges. This makes cleaning easier and keeps the appliance looking new for longer.

For those who appreciate organization, the Maytag W10321475A comes with multiple storage compartments, including crispers for fruits and vegetables, door bins, and even dedicated areas for dairy products. This thoughtful layout makes it easy to find what you need quickly.

In summary, the Maytag W10321475A combines style, efficiency, and advanced technology to deliver an exceptional refrigeration experience. Its spacious interior, energy-efficient operation, and innovative cooling features make it a suitable choice for diverse households seeking reliability and performance in their kitchen appliances.