The Ice Dispenser

Ice dispenses from the ice maker storage bin in the freezer when the dispenser pad is pressed. The dispensing system will not operate when the freezer door is open. To turn off the ice maker, see “Ice Maker and Storage Bin.”

Your ice maker can produce both crushed and cubed ice. Before dispensing ice, select which type of ice you prefer by pressing the ICE button, which is the second button from the left on the dispenser panel.

The display screen indicates which type of ice is selected.

The Dispenser Light (on some models)

When you use the dispenser, the light will automatically turn on. If you want the light to be on continuously, you may choose either ON or DIM. The display screen indicates which mode is selected.

ON: Press LIGHT to turn on the dispenser light.

DIM: Press LIGHT a second time to select DIM mode. The dispenser light will remain on, but at a lower intensity.

OFF: Press LIGHT a third time to turn off the dispenser light.

The dispenser lights are LEDs that cannot be changed. If it appears that your dispenser lights are not working, see “Troubleshooting” for more information.

CRUSHEDCUBED

For crushed ice, cubes are crushed before being dispensed. This may cause a slight delay when dispensing crushed ice. Noise from the ice crusher is normal, and pieces of ice may vary in size. When changing from crushed to cubed, a few ounces of crushed ice will be dispensed along with the first cubes.

To Dispense Ice:

1.Press the button to select the desired type of ice.

The Dispenser Lock (on some models)

The dispenser can be turned off for easy cleaning or to avoid unintentional dispensing by small children and pets.

NOTE: The lock feature does not shut off power to the refrigerator, to the ice maker, or to the dispenser light. It simply deactivates the dispenser controls and pad. To turn off the ice maker, see “Ice Maker and Storage Bin.”

Press and hold LOCK for 3 seconds to lock the dispenser.

Press and hold LOCK a second time to unlock the dispenser. The display screen indicates when the dispenser is locked.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

2.Hold a sturdy glass close to the dispenser opening so ice does not fall outside of the glass. Press the glass against the ice dispenser pad, or if necessary, use your index finger or other hand to press the pad while keeping the glass close to the dispenser opening.

IMPORTANT: You do not need to apply a lot of pressure to the pad in order to activate the ice dispenser. Pressing hard will not make the ice dispense faster or in greater quantities.

NOTE: You can dispense both ice and water at the same time. While using the dispenser pad to dispense ice, press the WATER dispenser button to also dispense water. Releasing the WATER dispenser button while still pressing the dispenser pad will not affect ice dispensing.

3.Remove the glass to stop dispensing.

NOTE: Ice may continue to dispense for up to 10 seconds after removing the glass from the pad. The dispenser may continue to make noise for a few seconds after dispensing.

LOCKED

Ice Maker and Storage Bin

Turning the Ice Maker On/Off

To turn on the ice maker, lift open the translucent ice maker door and lower the wire shutoff arm to the ON position.

To manually turn off the ice maker, lift the wire shutoff arm to the OFF (arm up) position and listen for the click. Ice can still be dispensed, but no more can be made.

NOTE: Your ice maker has an automatic shutoff. As ice is made, the ice cubes will fill the ice storage bin, and the ice cubes will raise the wire shutoff arm to the OFF (arm up) position. Do not force the wire shutoff arm up or down.

REMEMBER:

Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced.

The quality of your ice will be only as good as the quality of the water supplied to your ice maker. Avoid connecting the ice maker to a softened water supply. Water softener chemicals (such as salt) can damage parts of the ice maker and lead to poor quality ice. If a softened water supply cannot be avoided, make sure the water softener is operating properly and is well maintained.

Do not use anything sharp to break up the ice in the storage bin. This can cause damage to the ice container and the dispenser mechanism.

Do not store anything on top of or in the ice maker or storage bin.

7

Page 7
Image 7
Maytag W10321477A installation instructions Ice Maker and Storage Bin

W10321477A specifications

The Maytag W10321477A is a remarkable appliance component designed to enhance the functionality and performance of Maytag appliances, particularly in kitchen settings. Known primarily as a dishwasher door assembly, it plays a crucial role in ensuring effective operation and longevity of dishwashers.

One of the standout features of the W10321477A is its robust construction. Made from high-quality materials, this door assembly is engineered to withstand everyday wear and tear, ensuring durability over time. It is designed specifically for certain Maytag dishwasher models, ensuring a perfect fit and ease of installation. This model caters to the needs of homeowners who appreciate reliability and efficiency in their kitchen appliances.

Another significant characteristic of the W10321477A is its insulation capabilities. The door is designed to minimize noise during operation, allowing for a quieter kitchen experience. This is particularly valuable in open-plan living spaces or in homes where kitchen activities might interrupt family time or entertaining guests.

In terms of technology, the W10321477A is designed to work seamlessly with advanced wash cycles, providing optimal cleaning performance. The assembly features a strong seal that prevents water leakage, which is essential for maintaining the integrity of your kitchen flooring and cabinetry. With improved energy efficiency, it helps reduce water and electricity consumption, making it an environmentally friendly choice for homeowners.

The Maytag W10321477A also showcases an easy-to-clean surface, ensuring that maintenance is hassle-free. Its sleek design complements modern kitchen aesthetics while providing practical functionality.

Overall, the Maytag W10321477A stands out with its solid build quality, effective insulation, water management features, and compatibility with advanced washing technologies. It is an essential part of any Maytag dishwasher that promises both performance and convenience, allowing users to tackle their dishwashing needs with confidence and ease. With this door assembly, customers can enjoy the peace of mind that comes with a reliable and efficient appliance in their homes.