The doors will not close completely

■Door blocked open? Move food packages away from door.

■Bin or shelf in the way? Push bin or shelf back into the correct position.

The doors are difficult to open

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

■Gaskets dirty or sticky? Clean gaskets and contact surfaces with mild soap and warm water. Rinse and dry with soft cloth.

Temperature and Moisture

Temperature is too warm

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

■Door(s) opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep doors fully closed.

■Large load of food added? Allow several hours for refrigerator to return to normal temperature.

■Controls set correctly for the surrounding conditions? Adjust the controls a setting colder. Check temperature in 24 hours. See “Using the Control(s).”

Temperature is too cold in refrigerator

■Refrigerator air vent blocked? If the air vent located in the top, left, rear corner of the refrigerator compartment is blocked by items placed directly in front of it, the refrigerator will get too cold. Move items away from the air vent.

■Ice storage bin in correct position? See “Ice Maker and Ice Storage Bin.”

■Controls set correctly for the surrounding conditions? Adjust the controls a setting warmer. Check temperature in 24 hours. See “Using the Control(s).”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

■Humid room? Contributes to moisture buildup.

■Door(s) opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep doors fully closed.

Ice and Water

The ice maker is not producing ice or not enough ice

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Ice maker turned on? Make sure ice maker is on. See “Ice Maker and Ice Storage Bin.”

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Refrigerator door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

■Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

■Water filter installed on the refrigerator? Remove filter and operate ice maker. If ice volume improves, then the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■Water shutoff valve not fully open? Turn the water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Water filter installed on the refrigerator? Remove filter and operate ice maker. If ice quality improves, then the filter may be clogged or incorrectly installed. Replace filter or reinstall it correctly.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

■Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

■New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

■Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

■Odor transfer from food? Use airtight, moisture proof packaging to store food.

■Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

■Water filter installed on the refrigerator? Gray or dark discoloration in ice indicates that the water filtration system needs additional flushing. Flush the water system before using a new water filter. Replace water filter when indicated. See “Water Filtration System.”

14

Page 13 Page 15
Page 14
Image 14
Maytag W10329357A installation instructions Temperature and Moisture, Ice and Water
Page 13 Page 15

W10329357A specifications

The Maytag W10329357A is a high-performance appliance part designed for a variety of Maytag washing machines. This component plays a crucial role in optimizing the washing process, delivering reliability and efficiency. One of the standout features of the W10329357A is its robust construction, which ensures durability over time. Made from high-quality materials, this part can withstand the rigors of regular use while maintaining peak performance.

Another significant characteristic of the Maytag W10329357A is its compatibility with many Maytag models, making it a versatile option for homeowners. This broad applicability helps streamline maintenance and repairs, ensuring that consumers can find the right part for their specific needs without hassle. The part is engineered for easy installation, allowing users to replace worn-out components with minimal effort, thus reducing downtime.

In terms of technology, the Maytag W10329357A incorporates advanced design principles that enhance the washing machine's functionality. For instance, it may feature innovative designs that improve water flow, leading to more efficient cleaning cycles. This improvement not only helps in achieving cleaner laundry but also conserves water and energy, aligning with modern sustainability efforts.

The W10329357A also supports noise reduction technologies that contribute to a quieter washing experience. This is especially beneficial for households where laundry is done around the clock, ensuring that appliance operation does not disrupt daily activities. Alongside its noise-reducing properties, the part is designed to minimize vibrations, further enhancing stability during the washing process.

Overall, the Maytag W10329357A represents a blend of efficiency, durability, and technology, making it a smart choice for those looking to maintain or upgrade their Maytag washing machines. Whether you are experiencing issues with your current unit or simply wish to enhance its performance, the W10329357A can serve as a reliable solution, proving that quality and innovation can go hand-in-hand in the realm of home appliances. With this component, users can expect improved results in their laundry routines, leading to fresher and cleaner clothes every time.
Top Page Image Contents