CONTROL PANEL AND FEATURES
1 | 2 | 3 | 4 | 5 |
1 | 2 | 3 |
Not all features and options are available on all models. Appearance may vary.
1Water Level Control
Use this option to adjust the amount of water used with your load size. Use enough water to allow the load to move freely.
Wash Temperature | Suggested Fabrics |
|
|
Hot |
|
Some cold water is added to | Whites and pastels |
save energy. This will be cooler | Durable garments |
than your hot water heater setting. | Heavy soils |
|
|
Warm |
|
Some cold water will be added, | Bright colors |
so this will be cooler than what | Moderate to light soils |
your previous washer provided. |
|
|
|
Cool - brights/darks |
|
Warm water is added to assist | Colors that bleed or fade |
in soil removal and to help | Light soils |
dissolve detergents. |
|
|
|
Cold |
|
This is the temperature from | Dark colors that bleed |
your faucet. | or fade |
| Light soils |
|
|
2Temperature Control
Temperature Control senses and maintains uniform water temperatures by regulating incoming hot and cold water.
■■Warm and hot water will be cooler than what your previous washer provided.
■■Even in Cool wash, some warm water is let into washer to maintain a consistent minimum temperature.
Select a wash temperature based on the type of fabric and soils being washed. For best results, follow the garment label instructions, using the warmest wash water safe for your fabric. See “Wash Temperature” Chart.
NOTE: In wash water temperatures colder than 60° F (15.6° C), detergents do not dissolve well and soils can be difficult to remove.
3Cycle Control knob
Select the wash cycle best suited for your type of fabric. See “Cycle Guide” for more details.
4Extra Rinse
If you desire an extra rinse at the end of your regular cycle, turn the Extra Rinse knob to ON.
On models without the Extra Rinse knob, choose a second rinse by pushing the Cycle Control knob in and rotating it to any of the “Rinse” cycle settings.
Some cycles may have an automatic Extra Rinse at the end of the cycle.
5End of Cycle Signal
The End of Cycle Signal sounds when the cycle is complete.
3
